How To Safely Raise A Vehicle Using Ramps Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

How to Safely Raise a Vehicle Using Ramps
8 steps

Flags

BackCar and Truck
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Keep in mind that your vehicle won’t be level when using ramps, since you can only use ramps at one axle. Therefore, ramps aren’t advised for changing fluids (such as motor oil) because having the vehicle tipped up at an angle can prevent fluids from draining fully.

This guide can be completed by a single person, but it’s helpful to have a friend spot you from outside the vehicle as you drive it up the ramps.

If you’d rather raise your car or truck using a hydraulic jack and jack stands, follow this guide instead.

What you need

Step 1

              How to Safely Raise a Vehicle Using Ramps

Caution: Injury may result if this procedure is not followed properly. Be sure to follow each step carefully and follow all warnings.
To begin, park your vehicle on a firm, level surface such as concrete or asphalt.
Never try to raise your vehicle on soft or uneven terrain. If the ground shifts or the ramp changes position unexpectedly, you could be seriously injured or killed.
Center the steering wheel so that the front wheels point exactly straight ahead.

Caution: Injury may result if this procedure is not followed properly. Be sure to follow each step carefully and follow all warnings.

To begin, park your vehicle on a firm, level surface such as concrete or asphalt.

Never try to raise your vehicle on soft or uneven terrain. If the ground shifts or the ramp changes position unexpectedly, you could be seriously injured or killed.

Center the steering wheel so that the front wheels point exactly straight ahead.

1024

Step 2

Slide the first ramp directly in front of the vehicle’s front, driver-side wheel, until it touches the rubber of the tire.

Slide the first ramp directly in front of the vehicle’s front, driver-side wheel, until it touches the rubber of the tire.

Step 3

Put the second ramp into position directly in front of the vehicle’s front, passenger-side wheel.

Put the second ramp into position directly in front of the vehicle’s front, passenger-side wheel.

Step 4

Make sure each ramp is centered in the path of the tire so that once the vehicle moves forward, both wheels will stay completely supported by the ramps.

Make sure each ramp is centered in the path of the tire so that once the vehicle moves forward, both wheels will stay completely supported by the ramps.

Step 5

With the motor running and your vehicle in gear, begin slowly driving it straight forward onto the ramps.
Due to the steep incline of the ramps, you’ll need to give it more gas than you might expect. At first, the vehicle may not move forward at all.
Slowly and steadily apply more throttle until the vehicle begins creeping up the ramps.
When doing this for the first time, be prepared to stop quickly in case you accidentally apply too much throttle. Either keep one foot on the brake pedal, or one hand on the e-brake lever. If your car has a manual transmission, use your left foot to feather the clutch pedal.

With the motor running and your vehicle in gear, begin slowly driving it straight forward onto the ramps.

Due to the steep incline of the ramps, you’ll need to give it more gas than you might expect. At first, the vehicle may not move forward at all.

Slowly and steadily apply more throttle until the vehicle begins creeping up the ramps.

When doing this for the first time, be prepared to stop quickly in case you accidentally apply too much throttle. Either keep one foot on the brake pedal, or one hand on the e-brake lever. If your car has a manual transmission, use your left foot to feather the clutch pedal.

Step 6

Continue driving slowly up the ramps until your vehicle levels out, and then stop immediately.
You can either find the correct place to stop purely by feel, or you can have a friend spot you from outside the vehicle.
Most automotive ramps have a slight dip at the top, or a bump stop, or both, to help stabilize the vehicle with the wheels in the correct position.
If you don’t make it all the way up the ramps on the first try, that’s okay—it can take several tries to get a feel for how the vehicle responds on the ramps. Let it roll back down, stop at the bottom, reposition the ramps and try again.

Continue driving slowly up the ramps until your vehicle levels out, and then stop immediately.

You can either find the correct place to stop purely by feel, or you can have a friend spot you from outside the vehicle.

Most automotive ramps have a slight dip at the top, or a bump stop, or both, to help stabilize the vehicle with the wheels in the correct position.

If you don’t make it all the way up the ramps on the first try, that’s okay—it can take several tries to get a feel for how the vehicle responds on the ramps. Let it roll back down, stop at the bottom, reposition the ramps and try again.

Step 7

With the front wheels in final position at the tops of the ramps:
Put the vehicle in Park (or first gear if you have a vehicle with a manual gearbox).
Set the parking brake.
Turn off the ignition and remove the ignition key.
Use extra care when exiting the vehicle, which is now raised much further from the ground than when you entered.

With the front wheels in final position at the tops of the ramps:

Put the vehicle in Park (or first gear if you have a vehicle with a manual gearbox).

Set the parking brake.

Turn off the ignition and remove the ignition key.

Use extra care when exiting the vehicle, which is now raised much further from the ground than when you entered.

Step 8

Chock the rear wheels to prevent the vehicle from rolling backwards down the ramps.

Chock the rear wheels to prevent the vehicle from rolling backwards down the ramps.

When your repair is complete, remove the wheel chocks and any other tools/obstructions before carefully backing your vehicle down and off the ramps.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 2 other contributors

                    Jeff Suovanen

Member since: 08/06/2013

400,983 Reputation

                                      261 Guides authored                  



                       Badges:
                       48







                                                        +45 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,767 Guides authored

Stephen Fujiwara - Aug 22, 2019

G’day Jeff

Thanks for the great guide! Very clear.

Question: Is it a bad idea to use just one ramp?

Say, for an oil change.

Stephen

Dikran Kehyayan - Dec 5, 2019

Thanks for the guide, does the same ramp work for a regular sedan and an SUV? or it has to be different height? thanks

Arthur Shi - Dec 6, 2019

Hi Dikran,

You can use the same ramp for either vehicles. Be sure to check whether the ramps can handle the SUV’s weight.

Buster Ecks - Sep 15, 2020

Good stuff. I still use ramps to change my oil simply because the amount of oil left in the vehicle due to the angle is negligible. 1 cup of oil remaining when I’ve removed and are adding in 4-5 quarts (16-20 cups) really isn’t a big deal unless you’re anal retentive.

Andrew Morgan - Jun 2, 2021

What ramps are being used in the pictures?

Introduction#

What you need#

Team#

Introduction

What you need

Team