Difficulty
Difficult
Steps
6
Time Required
5 minutes
Sections
2
- Back Panel
- 4 steps
- Microphone
- 2 steps
Flags
0
BackHP 10 2101
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Identify the SD card port.
Identify the SD card port.
1024
Step 2
- Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
- Do not insert opening tool too far. Avoid making contact with the metal inside the port.
Insert the smallest plastic opening tool into the SD card port. Gently pry until the back panel separates from the screen panel.
Do not insert opening tool too far. Avoid making contact with the metal inside the port.
Step 3
- Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
Slide the opening tool along the seam between the back panel and the screen panel, prying the panels apart as you move around the edges.
Step 4
- Separate the back panel from the rest of the device.
Separate the back panel from the rest of the device.
Step 5
Microphone
- Desolder the microphone wires from the motherboard.
Desolder the microphone wires from the motherboard.
Step 6
- Separate the microphone from the rest of the device.
Separate the microphone from the rest of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Bryce Harmsen
Member since: 09/25/2018
668 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Central Washington University, Team S1-G4, Pengilly Fall 2018
Member of Central Washington University, Team S1-G4, Pengilly Fall 2018
CWU-PENGILLY-F18S1G4
4 Members
10 Guides authored
