Difficulty
Moderate
Steps
7
Time Required
30 - 45 minutes
Sections
3
- Battery
- 1 step
- Back Panel
- 2 steps
- Motherboard
- 4 steps
Flags
4
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackHP 14-am052nr
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop over to its bottom so that the backside is facing you.
- Using your fingers, push the two locking tabs inwards to release the battery.
- Remove the battery from the device.
Turn the laptop over to its bottom so that the backside is facing you.
Using your fingers, push the two locking tabs inwards to release the battery.
Remove the battery from the device.
1024
Step 2
Back Panel
- After removing the battery with the laptop on its back, expose screws that are hidden under the rubber feet and the center label.
- Using the Phillips #0 screwdriver, remove fourteen (14) 6 mm screws from the back panel.
After removing the battery with the laptop on its back, expose screws that are hidden under the rubber feet and the center label.
Using the Phillips #0 screwdriver, remove fourteen (14) 6 mm screws from the back panel.
Step 3
- Use a prying tool to remove the back panel from the base of the computer.
Use a prying tool to remove the back panel from the base of the computer.
Step 4
Motherboard
- Using the Phillips #0 screwdriver, remove three 3 mm screws and five 3.5 mm screws from the motherboard.
Using the Phillips #0 screwdriver, remove three 3 mm screws and five 3.5 mm screws from the motherboard.
Step 5
- Using the Phillips #0 screwdriver, remove four 1.5 mm screws from the silver cover.
- Remove the silver cover from the device.
Using the Phillips #0 screwdriver, remove four 1.5 mm screws from the silver cover.
Remove the silver cover from the device.
Step 6
- Unplug all connectors attached to the motherboard.
Unplug all connectors attached to the motherboard.
Step 7
- Once all plugs and screws disconnected, remove the motherboard from the device.
Once all plugs and screws disconnected, remove the motherboard from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Matthew Heather
Member since: 11/03/2021
379 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 3-3, Sinclaire Fall 2021
Member of UMass Dartmouth, Team 3-3, Sinclaire Fall 2021
UMASSD-SINCLAIRE-F21S3G3
3 Members
7 Guides authored