Difficulty

Moderate

Steps

10

Time Required

                          15 - 20 minutes

Sections

3

  • Battery
  • 4 steps
  • Back Panel
  • 3 steps
  • Fan
  • 3 steps

Flags

0

  • BackHP 15-ac121dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove all external devices from the computer.
  • Remove the charging cord from the computer.

Remove all external devices from the computer.

Remove the charging cord from the computer.

1024

Step 2

  • Turn off the computer by holding the power button.

Turn off the computer by holding the power button.

Step 3

  • To remove the battery, slide the left slider on the back to the unlocked position.

To remove the battery, slide the left slider on the back to the unlocked position.

Step 4

  • Push the right slider inwards.
  • Remove the battery out by pulling straight out and to the right.

Push the right slider inwards.

Remove the battery out by pulling straight out and to the right.

Step 5

              Back Panel
  • Locate the CD Compartment panel and gently slide it out.

Locate the CD Compartment panel and gently slide it out.

Step 6

  • Remove the back of the laptop by unscrewing the screws shown.
  • Also remove the other 5 Phillips screws lining the back cover.

Remove the back of the laptop by unscrewing the screws shown.

Also remove the other 5 Phillips screws lining the back cover.

Step 7

  • Using the prying tool, wedge it underneath the back of the laptop and do the same all around until the back comes off.
  • Dont forget to unscrew 2 screws under 2 plastic tabs (one on each hing). The lid will not come off without them being removed!

Using the prying tool, wedge it underneath the back of the laptop and do the same all around until the back comes off.

Dont forget to unscrew 2 screws under 2 plastic tabs (one on each hing). The lid will not come off without them being removed!

Step 8

              Fan
  • Locate the Fan as shown.
  • Pull out the black cable, with four wires attached from its port.

Locate the Fan as shown.

Pull out the black cable, with four wires attached from its port.

Step 9

  • Pull out the white cable wire from its port.
  • Unscrew the two black Phillips screws holding in the fan.

Pull out the white cable wire from its port.

Unscrew the two black Phillips screws holding in the fan.

Step 10

  • Remove fan.
  • Unscrew the two screws holding in the fan.

Remove fan.

Unscrew the two screws holding in the fan.

Replace fan. To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Onose Aigbe

Member since: 01/30/2018

390 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Baylor, Team S1-G2, Johnson Spring 2018                        

                                                  Member of Baylor, Team S1-G2, Johnson Spring 2018 



                    BU-JOHNSON-S18S1G2                     


                                            3 Members                     


                                            6 Guides authored