Difficulty
Easy
Steps
9
Time Required
5 minutes
Sections
3
- Battery
- 4 steps
- Back Panel
- 3 steps
- RAM
- 2 steps
Flags
0
BackHP 15-ac121dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove all external devices from the computer.
- Remove the charging cord from the computer.
Remove all external devices from the computer.
Remove the charging cord from the computer.
1024
Step 2
- Turn off the computer by holding the power button.
Turn off the computer by holding the power button.
Step 3
- To remove the battery, slide the left slider on the back to the unlocked position.
To remove the battery, slide the left slider on the back to the unlocked position.
Step 4
- Push the right slider inwards.
- Remove the battery out by pulling straight out and to the right.
Push the right slider inwards.
Remove the battery out by pulling straight out and to the right.
Step 5
Back Panel
- Place the laptop with the back panel facing up and the battery compartment facing away from you.
- Using a spudger, carefully remove the rubber feet on both sides of the battery compartment.
Place the laptop with the back panel facing up and the battery compartment facing away from you.
Using a spudger, carefully remove the rubber feet on both sides of the battery compartment.
Step 6
- Using a Phillips #000 screwdriver, remover the ten 7mm screws on the back panel.
- Using the same screwdriver, remove the two 5mm Phillips #000 screws on both sides of the battery compartment.
Using a Phillips #000 screwdriver, remover the ten 7mm screws on the back panel.
Using the same screwdriver, remove the two 5mm Phillips #000 screws on both sides of the battery compartment.
Step 7
- With the same orientation as the previous step, locate the bottom left corner.
- Using a plastic opening tool, carefully pry off and remove the back panel.
With the same orientation as the previous step, locate the bottom left corner.
Using a plastic opening tool, carefully pry off and remove the back panel.
Step 8
RAM
- With the back panel removed, orient the laptop with the fan located in the bottom left corner.
- Locate the RAM card.
With the back panel removed, orient the laptop with the fan located in the bottom left corner.
Locate the RAM card.
Step 9
- Using your fingers, carefully release the locking devices on both sides of the RAM card by moving them away from each other.
- The RAM card will pop up to sit at an angle.
- Carefully remove the RAM card with the same orientation which it sits.
Using your fingers, carefully release the locking devices on both sides of the RAM card by moving them away from each other.
The RAM card will pop up to sit at an angle.
Carefully remove the RAM card with the same orientation which it sits.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Sarah Smith
Member since: 09/30/2019
97 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
The Citadel Military College of South Carolina, Team S3-G9, Eggleston Fall 2019
Member of The Citadel Military College of South Carolina, Team S3-G9, Eggleston Fall 2019
CMCSC-EGGLESTON-F19S3G9
3 Members
4 Guides authored