Difficulty

Moderate

Steps

9

Time Required

                          20 minutes

Sections

2

  • Battery
  • 2 steps
  • Motherboard
  • 7 steps

Flags

0

  • BackHP 15-af013cl

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Start off by flipping the laptop on its back.

Start off by flipping the laptop on its back.

1024

Step 2

  • Push the two spring-loaded tabs inward.
  • Once unlatched, pull the battery out of its compartment.

Push the two spring-loaded tabs inward.

Once unlatched, pull the battery out of its compartment.

Step 3

              Motherboard
  • Using the Phillips P0 screwdriver, remove the nine 2.5mm x 6.5mm screws from the bottom of the laptop.
  • Remove the additional two 2.0mm × 1.5mm Phillips screws located in the battery compartment.

Using the Phillips P0 screwdriver, remove the nine 2.5mm x 6.5mm screws from the bottom of the laptop.

Remove the additional two 2.0mm × 1.5mm Phillips screws located in the battery compartment.

Step 4

  • Remove the optical disk drive from the side of the laptop.

Remove the optical disk drive from the side of the laptop.

Step 5

  • Lift off the bottom cover, exposing the motherboard and other components underneath.

Lift off the bottom cover, exposing the motherboard and other components underneath.

Step 6

  • Begin by removing the 3 Phillips M2.0mm × 10.0mm screws of the processor fan.
  • Disconnect the fan connector from the motherboard.

Begin by removing the 3 Phillips M2.0mm × 10.0mm screws of the processor fan.

Disconnect the fan connector from the motherboard.

Step 7

  • Remove the five Phillips 2.5mm × 6 .5mm screws using the Phillips P0 screwdriver.

Remove the five Phillips 2.5mm × 6 .5mm screws using the Phillips P0 screwdriver.

Step 8

  • Disconnect the ribbon cables for the keyboard, display, trackpad and the various system components.
  • Remove the Wi-Fi card and cables.

Disconnect the ribbon cables for the keyboard, display, trackpad and the various system components.

Remove the Wi-Fi card and cables.

Step 9

  • Carefully lift out the motherboard from the laptop.

Carefully lift out the motherboard from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Stephen Perreira

Member since: 09/27/2017

760 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S8-G6, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S8-G6, Banghart Fall 2017 



                    CPSU-BANGHART-F17S8G6                     


                                            5 Members                     


                                            6 Guides authored

elbetel ashenafi - Jul 10, 2022

Reply

i need motherboard hp model:15-bs127ne