Difficulty

Moderate

Steps

7

Time Required

                          15 minutes

Sections

1

  • Battery
  • 7 steps

Flags

0

  • BackHP Notebook 15-da0000 Series

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Power down your laptop before proceeding.
  • Turn your laptop over so that the Laptop Identification Tag on the underside of the laptop faces the ceiling.

Power down your laptop before proceeding.

Turn your laptop over so that the Laptop Identification Tag on the underside of the laptop faces the ceiling.

1024

Step 2

  • Using the plastic opening tools, peel back the plastic feet from the underside of the laptop.

Using the plastic opening tools, peel back the plastic feet from the underside of the laptop.

Step 3

  • Using a Phillips #1 screwdriver, remove the eleven 9.0 mm screws holding the back cover in place.

Using a Phillips #1 screwdriver, remove the eleven 9.0 mm screws holding the back cover in place.

Step 4

  • Slide the optical drive out of the computer.

Slide the optical drive out of the computer.

Step 5

  • Flip the computer over and open the screen.
  • Start from a corner and run the plastic opening tools along the edge of the back cover.
  • After the cover has been completely loosened around the entire perimeter, close the screen and flip the computer over.
  • Gently pry back the cover starting from the middle, bottom edge.
  • Make sure not to bend or crack the plastic cover.

Flip the computer over and open the screen.

Start from a corner and run the plastic opening tools along the edge of the back cover.

After the cover has been completely loosened around the entire perimeter, close the screen and flip the computer over.

Gently pry back the cover starting from the middle, bottom edge.

Make sure not to bend or crack the plastic cover.

Step 6

  • Using the Phillips #1 screwdriver, remove the three 8.0 mm screws holding the battery in place.

Using the Phillips #1 screwdriver, remove the three 8.0 mm screws holding the battery in place.

Step 7

  • Remove the battery by tilting the top of the battery towards you and pulling the battery away from the mounting tabs.

Remove the battery by tilting the top of the battery towards you and pulling the battery away from the mounting tabs.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Xavier Hung

Member since: 02/07/2019

758 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       UC Davis, Team S20-G4, Lore Winter 2019                        

                                                  Member of UC Davis, Team S20-G4, Lore Winter 2019 



                    UCD-LORE-W19S20G4                     


                                            3 Members                     


                                            4 Guides authored

Divya Lekha - Sep 8, 2021

Reply

Where to find, buy the same battery.

Kevin - Sep 19, 2021

Reply

Thank you for the guide! =D