Difficulty
Easy
Steps
4
Time Required
10 - 20 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackHP 15 Series
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the seven screws from the rear panel using a Phillips #00 screwdriver.
Remove the seven screws from the rear panel using a Phillips #00 screwdriver.
1024
Step 2
- Insert the tip of a spudger between the rear panel and the top case to separate the top case from bottom case.
- Slowly slide the spudger around the device to loosen the bottom part.
- Pull the bottom case out gently.
Insert the tip of a spudger between the rear panel and the top case to separate the top case from bottom case.
Slowly slide the spudger around the device to loosen the bottom part.
Pull the bottom case out gently.
Step 3
- Remove the three screws around the battery using a Phillips #00 screwdriver.
Remove the three screws around the battery using a Phillips #00 screwdriver.
Step 4
- Slowly use your two hands to take the current battery out.
Slowly use your two hands to take the current battery out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Dalha Mohammed
Member since: 10/31/2022
109 Reputation
1 Guide authored
Badges:
2
Team
York University, Team B-9, Allen Fall 2022
Member of York University, Team B-9, Allen Fall 2022
YORK-ALLEN-F22SBG9
2 Members
1 Guide authored
