Hp 17 X061Nr Disassembly Repair Guide

Difficulty

Moderate

Steps

Time Required

                          9 - 10 minutes

Sections

HP 17-x061nr Disassembly
4 steps

Flags

BackHP 17-x061nr
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              HP 17-x061nr  Disassembly

With the laptop upside down, remove the battery by hand and the twelve 7.0 mm screws that are holding the back case to the front. Use a JIS #0 screwdriver to remove the screws.

With the laptop upside down, remove the battery by hand and the twelve 7.0 mm screws that are holding the back case to the front. Use a JIS #0 screwdriver to remove the screws.

1024

Step 2

Peel back the rubber footrests located next to the battery, on the left and right sides.
Remove the two 7.0 mm screws underneath the rubber feet using a JIS #0 screwdriver.

Peel back the rubber footrests located next to the battery, on the left and right sides.

Remove the two 7.0 mm screws underneath the rubber feet using a JIS #0 screwdriver.

Step 3

Slide the optical drive out and away from the laptop.

Slide the optical drive out and away from the laptop.

Step 4

Flip the computer over and use a plastic opening tool to wedge between the back and front cases.
Trace the perimeter of the laptop. Make sure to keep the tool inserted between the front and back cases. You will hear popping sounds as the back case becomes disengaged from the front plate.
Flip the laptop over and lift the back case off. Now you have access to all of the internal hardware.

Flip the computer over and use a plastic opening tool to wedge between the back and front cases.

Trace the perimeter of the laptop. Make sure to keep the tool inserted between the front and back cases. You will hear popping sounds as the back case becomes disengaged from the front plate.

Flip the laptop over and lift the back case off. Now you have access to all of the internal hardware.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 2 other contributors

                    Michael hansen

Member since: 02/12/2018

415 Reputation

                                      1 Guide authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Washington State, Team S1-G1, Lobnitz Spring 2018                        

                                                  Member of Washington State, Team S1-G1, Lobnitz Spring 2018 



                    WSU-LOBNITZ-S18S1G1                     


                                            5 Members                     


                                            5 Guides authored

Frank Buccella - Oct 11, 2018

I have a 17-x051nr but the steps are exactly the same. Thank you! (I never like peeling off the bottom feet unless I know for sure there’s a screw under there)

Bud Hines - Apr 23, 2020

i searched all over for how to do this with my 17 inch HP Elite Notebook. Your instructions were perfect! Thank you!

Martyn Jones - Jul 17, 2021

Thank you! Also worked for HP-14AN013NA

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team