Difficulty
Difficult
Steps
4
Time Required
10 - 15 minutes
Sections
2
- Battery
- 2 steps
- Speaker
- 2 steps
Flags
0
BackHP 7 1800
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the back panel
- Carefully insert a Spudger into one of the corners of the tablet.
- Slide the Spudger along the edge popping the tabs out along the way.
- Be careful not to break the tabs.
Carefully insert a Spudger into one of the corners of the tablet.
Slide the Spudger along the edge popping the tabs out along the way.
Be careful not to break the tabs.
1024
Step 2
Remove the battery
- Slide the Spudger under the battery to lift it off the adhesive.
- Gently pull the cable connection from the motherboard using tweezers.
Slide the Spudger under the battery to lift it off the adhesive.
Gently pull the cable connection from the motherboard using tweezers.
Step 3
Desolder the speaker wires
- Desolder the two leads of the speaker wire that are connected to the motherboard.
Desolder the two leads of the speaker wire that are connected to the motherboard.
Step 4
Remove the speaker
- Using tweezers, gently pull the speaker off of the metal plate.
- The speaker is held onto the metal plate with light adhesive. It will require a little force to peel off.
Using tweezers, gently pull the speaker off of the metal plate.
The speaker is held onto the metal plate with light adhesive. It will require a little force to peel off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
TMD
Member since: 01/21/2015
765 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 4-1, Brown Winter 2015
Member of USF Tampa, Team 4-1, Brown Winter 2015
USFT-BROWN-W15S4G1
4 Members
14 Guides authored
