Hp 7 Plus 1301 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          15 minutes            

Sections

1

• Battery
• 5 steps

Flags

0

• BackHP 7 PLUS 1301

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Make sure the device is off and not plugged in before starting.
• Using the Torx T5 screwdriver, remove the 3mm screws on all 4 corners of the device.

Make sure the device is off and not plugged in before starting.

Using the Torx T5 screwdriver, remove the 3mm screws on all 4 corners of the device.

1024

Step 2

• Using the plastic opening tool, push in between the front, then slide it around.
• Slide the plastic opening tool all the way around the tablet to separate the back cover.
• Be careful when trying to remove the back as the screen can be damaged with excessive force.

Using the plastic opening tool, push in between the front, then slide it around.

Slide the plastic opening tool all the way around the tablet to separate the back cover.

Be careful when trying to remove the back as the screen can be damaged with excessive force.

Step 3

• Continue sliding the plastic opening tool around the tablet until the cover fully separates from the device.
• Remove the back cover.

Continue sliding the plastic opening tool around the tablet until the cover fully separates from the device.

Remove the back cover.

Step 4

• Push out the connector to disconnect the battery.
• Move the battery connector clear of the connector socket.

Push out the connector to disconnect the battery.

Move the battery connector clear of the connector socket.

Step 5

• Carefully remove the battery by sliding a plastic spudger under the battery. Use an adhesive remover if available under the battery to make it easier for the battery to come off.

Carefully remove the battery by sliding a plastic spudger under the battery. Use an adhesive remover if available under the battery to make it easier for the battery to come off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Adanna Ilori                     

Member since: 02/05/2019

301 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UC Davis, Team S20-G6, Lore Winter 2019                        

                                                  Member of UC Davis, Team S20-G6, Lore Winter 2019 



                    UCD-LORE-W19S20G6                     


                                            3 Members                     


                                            4 Guides authored