Difficulty

Moderate

Steps

13

Time Required

                          45 minutes

Sections

3

  • Keyboard
  • 3 steps
  • Bezel
  • 4 steps
  • Screen
  • 6 steps

Flags

0

  • BackHP Chromebook 11 G8 EE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Use a Phillips #1 screwdriver to remove:
  • Four 7 mm screws.
  • Two 8 mm screws.

Use a Phillips #1 screwdriver to remove:

Four 7 mm screws.

Two 8 mm screws.

1024

Step 2

  • Flip the device over and open the lid.
  • Use a plastic opening tool to pry the keyboard assembly away from the bottom case, prying around the perimeter until it fully separates.
  • Lift the keyboard assembly from the laptop towards you, away from the screen.

Flip the device over and open the lid.

Use a plastic opening tool to pry the keyboard assembly away from the bottom case, prying around the perimeter until it fully separates.

Lift the keyboard assembly from the laptop towards you, away from the screen.

Step 3

  • Lift the keyboard ribbon lock bar and use tweezers to disconnect the keyboard ribbon from the motherboard.
  • Lift the lock bar and use tweezers to remove the touchpad ribbon.
  • Remove the keyboard.

Lift the keyboard ribbon lock bar and use tweezers to disconnect the keyboard ribbon from the motherboard.

Lift the lock bar and use tweezers to remove the touchpad ribbon.

Remove the keyboard.

Step 4

              Bezel
  • Using your hands, pry off the hinge cover by lifting it.

Using your hands, pry off the hinge cover by lifting it.

Step 5

  • Using the opening tool, pry the bezel away from the top case.
  • It requires a bit of force; you aren’t going to break it!

Using the opening tool, pry the bezel away from the top case.

It requires a bit of force; you aren’t going to break it!

Step 6

  • Pull the bezel toward you.
  • Peel it away from the screen gently.

Pull the bezel toward you.

Peel it away from the screen gently.

Step 7

  • Completely remove the bezel.

Completely remove the bezel.

Step 8

              Screen
  • Remove the four 3.5 mm screws with a Phillips #1 screwdriver.

Remove the four 3.5 mm screws with a Phillips #1 screwdriver.

Step 9

  • Flip the screen toward you.

Flip the screen toward you.

Step 10

  • Use tweezers to peel away the black tape holding the connector.

Use tweezers to peel away the black tape holding the connector.

Step 11

  • Use the tweezers to pull away the tan tape.
  • You should see the colored wires of the connector.

Use the tweezers to pull away the tan tape.

You should see the colored wires of the connector.

Step 12

  • Using the tweezers, lift up the small red latch on the connector.
  • Pull off the connector.

Using the tweezers, lift up the small red latch on the connector.

Pull off the connector.

Step 13

  • Remove the screen.

Remove the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Isabella Brown

Member since: 10/25/2022

291 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team 4-2, Sinclaire Fall 2022                        

                                                  Member of UMass Dartmouth, Team 4-2, Sinclaire Fall 2022 



                    UMASSD-SINCLAIRE-F22S4G2                     


                                            5 Members                     


                                            7 Guides authored