Difficulty
Moderate
Steps
13
Time Required
40 minutes - 1 hour
Sections
3
- HP Chromebook 11A G8 EE Disassembly
- 3 steps
- Bezel
- 4 steps
- Screen
- 6 steps
Flags
0
BackHP Chromebook 11A G8 EE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
HP Chromebook 11A G8 EE Disassembly
- On the bottom of the laptop, remove four 7 mm screw using a Phillips #1 screwdriver.
- Using the Phillips #1 screwdriver, remove two 8 mm screws just below the four you removed.
On the bottom of the laptop, remove four 7 mm screw using a Phillips #1 screwdriver.
Using the Phillips #1 screwdriver, remove two 8 mm screws just below the four you removed.
1024
Step 2
- Flip the laptop over and open up the display.
- Using the iFixit opening tool, carefully separate the palm rest from the bottom cover by working your way around the perimeter and prying it up.
- You will hear an audible and tactile click or pop letting you know that you have unclipped a portion of the palm rest from the base enclosure.
- Lift the palm rest of the laptops towards you, away from the screen.
Flip the laptop over and open up the display.
Using the iFixit opening tool, carefully separate the palm rest from the bottom cover by working your way around the perimeter and prying it up.
You will hear an audible and tactile click or pop letting you know that you have unclipped a portion of the palm rest from the base enclosure.
Lift the palm rest of the laptops towards you, away from the screen.
Step 3
- Carefully, lift the keyboard ribbon lock and disconnect the keyboard ribbon from the motherboard.
- Disconnect the touchpad ribbon from the motherboard, and remove top cover.
- Remove the keyboard.
Carefully, lift the keyboard ribbon lock and disconnect the keyboard ribbon from the motherboard.
Disconnect the touchpad ribbon from the motherboard, and remove top cover.
Remove the keyboard.
Step 4
Bezel
- Pry the hinge cap off with your hands by lifting it up.
Pry the hinge cap off with your hands by lifting it up.
Step 5
- Use the iFixit opening tool to pry the bezel up.
Use the iFixit opening tool to pry the bezel up.
Step 6
- Once you have pried away the bezel, pull it up towards you.
- Peel it off gently from the screen.
Once you have pried away the bezel, pull it up towards you.
Peel it off gently from the screen.
Step 7
- You are finished once the bezel is off of the device.
You are finished once the bezel is off of the device.
Step 8
Screen
- Remove the four 3.5 mm screws with the Phillips #0 screwdriver.
Remove the four 3.5 mm screws with the Phillips #0 screwdriver.
Step 9
- Flip the screen towards you.
Flip the screen towards you.
Step 10
- Once the screen is flipped down, use the tweezers to peel away the black tape holding down the connector.
Once the screen is flipped down, use the tweezers to peel away the black tape holding down the connector.
Step 11
- Next, peel away the tan tape, using the tweezers, exposing the screen connector.
Next, peel away the tan tape, using the tweezers, exposing the screen connector.
Step 12
- Using the tweezers, remove the connector by the latch attached to it.
Using the tweezers, remove the connector by the latch attached to it.
Step 13
- Finally, pull away the screen, to remove it from the device.
Finally, pull away the screen, to remove it from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Kim Travers
Member since: 09/03/2021
345 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
University of Alabama, Team 2-1, Bedsole Fall 2021
Member of University of Alabama, Team 2-1, Bedsole Fall 2021
UA-BEDSOLE-F21S2G1
4 Members
7 Guides authored
