Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes

Sections

2

  • Keyboard and Touchpad
  • 5 steps
  • Speaker
  • 2 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackHP Chromebook 14-Q010DX

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard and Touchpad
  • The yellow circle represents the rubber covering that protects the screw. And the red circle represents the screws.
  • Flip the laptop such that the base of the laptop should face you. Remove the rubber covering with help of any sharp pointed object and then unscrew the screw.

The yellow circle represents the rubber covering that protects the screw. And the red circle represents the screws.

Flip the laptop such that the base of the laptop should face you. Remove the rubber covering with help of any sharp pointed object and then unscrew the screw.

1024

Step 2

  • Using a plastic opening tool or the spudger to separate the keyboard from the frame of the laptop.
  • Gently lower the keyboard towards you to expose the wires attached beneath.

Using a plastic opening tool or the spudger to separate the keyboard from the frame of the laptop.

Gently lower the keyboard towards you to expose the wires attached beneath.

Step 3

  • Lift the black flap in the left black rectangle and pull the blue ribbon gently towards you until it is disconnected.
  • Lift the white flap in the right black rectangle and pull the blue ribbon towards you until it is disconnected.

Lift the black flap in the left black rectangle and pull the blue ribbon gently towards you until it is disconnected.

Lift the white flap in the right black rectangle and pull the blue ribbon towards you until it is disconnected.

Step 4

  • Lift keyboard slightly and remove the strip gently so is not damaging any parts . The tape has no function other than to keep the wire tucked away.

Lift keyboard slightly and remove the strip gently so is not damaging any parts . The tape has no function other than to keep the wire tucked away.

Step 5

  • Keyboard is now detached from the laptop and can be placed to the side.

Keyboard is now detached from the laptop and can be placed to the side.

Step 6

              Speaker
  • Remove the two screws indicated by the red circles.
  • Using fingers or the spudger, slide out the black connector indicated by the orange rectangle on the left.
  • Undo the black tape indicated by the middle orange rectangle from the frame of the laptop

Remove the two screws indicated by the red circles.

Using fingers or the spudger, slide out the black connector indicated by the orange rectangle on the left.

Undo the black tape indicated by the middle orange rectangle from the frame of the laptop

Step 7

  • Gently remove speakers.

Gently remove speakers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors 


                    Brandon Nolen

Member since: 01/28/2015

3,500 Reputation

                                      1 Guide authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 17-2, Watkins Winter 2015                        

                                                  Member of USF Tampa, Team 17-2, Watkins Winter 2015 



                    USFT-WATKINS-W15S17G2                     


                                            4 Members                     


                                            8 Guides authored