Hp Chromebook 14 X013Dx Battery Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          20 minutes            

Sections

2

• Keyboard, Touchpad
• 5 steps
• Battery
• 4 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHP Chromebook 14-x013dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Keyboard, Touchpad               

• Using the plastic spudger, gently lift the 5 rubber pads away from their seating.

Using the plastic spudger, gently lift the 5 rubber pads away from their seating.

1024

Step 2

• Remove the five 6mm screws located under the removed pads using Phillips #00 screwdriver.

Remove the five 6mm screws located under the removed pads using Phillips #00 screwdriver.

Step 3

• With the Phillips #00 screwdriver, remove the remaining eight 6mm screws. You will now have thirteen 6mm screws removed from the case.

With the Phillips #00 screwdriver, remove the remaining eight 6mm screws. You will now have thirteen 6mm screws removed from the case.

Step 4

• To continue removing the back cover, turn the laptop over as displayed.
• Use the plastic spudger to gently pry around the base of the laptop from the back cover. Continue prying around the entire base of the laptop.

To continue removing the back cover, turn the laptop over as displayed.

Use the plastic spudger to gently pry around the base of the laptop from the back cover. Continue prying around the entire base of the laptop.

Step 5

• Gently lift the silver base of the laptop from the bottom, but do not remove it.
• To remove the ribbon cables, lift the latch holding the ribbon cables in place and then pull them free.
• Remove the keyboard panel from the laptop.

Gently lift the silver base of the laptop from the bottom, but do not remove it.

To remove the ribbon cables, lift the latch holding the ribbon cables in place and then pull them free.

Remove the keyboard panel from the laptop.

Step 6

              Battery               

• Remove the eight 4mm screws holding the battery in place using the Phillips #00 screwdriver.

Remove the eight 4mm screws holding the battery in place using the Phillips #00 screwdriver.

Step 7

• Remove the ribbon cable that runs over the battery by lifting up the plastic latches and pulling the cable away.

Remove the ribbon cable that runs over the battery by lifting up the plastic latches and pulling the cable away.

Step 8

• Unhook the battery’s power connector from the motherboard.

Unhook the battery’s power connector from the motherboard.

Step 9

• Lift the battery out of the laptop case.

Lift the battery out of the laptop case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    NHerbert                     

Member since: 09/28/2017

572 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team S3-G6, Nance Fall 2017                        

                                                  Member of USF Tampa, Team S3-G6, Nance Fall 2017 



                    USFT-NANCE-F17S3G6                     


                                            4 Members                     


                                            5 Guides authored