Difficulty
Moderate
Steps
8
Time Required
25 - 30 minutes
Sections
1
- Keyboard
- 8 steps
Flags
0
BackHP Chromebook CB2L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Flip the Chromebook over so the blue panels are showing.
- Starting in the top left or right corner, use the plastic opening tool to remove the large blue panel.
- This piece has fragile plastic connectors. Don’t damage them.
Flip the Chromebook over so the blue panels are showing.
Starting in the top left or right corner, use the plastic opening tool to remove the large blue panel.
This piece has fragile plastic connectors. Don’t damage them.
1024
Step 2
- Remove six 4.77mm screws using the Phillips #1 screwdriver.
Remove six 4.77mm screws using the Phillips #1 screwdriver.
Step 3
- Starting in the top right-hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel.
Starting in the top right-hand corner of the exposed metal piece, use the blue plastic opening tool to remove the back panel.
Step 4
- Remove twenty 3.42mm screws with the Phillips #1 screwdriver.
Remove twenty 3.42mm screws with the Phillips #1 screwdriver.
Step 5
- Remove the black and white antennae wires, the white ribbon cables, the large black connecter, and the speaker cable from the motherboard.
- Grabbing the boards by the edges, remove the motherboard and audio/USB board.
Remove the black and white antennae wires, the white ribbon cables, the large black connecter, and the speaker cable from the motherboard.
Grabbing the boards by the edges, remove the motherboard and audio/USB board.
Step 6
- Remove the red and blue antennae wires from the SIM card board.
- Remove the SIM card tray.
- Flip the board over and use the plastic opening tool to remove the ribbon cable, then remove the board.
Remove the red and blue antennae wires from the SIM card board.
Remove the SIM card tray.
Flip the board over and use the plastic opening tool to remove the ribbon cable, then remove the board.
Step 7
- Remove the speakers and battery.
Remove the speakers and battery.
Step 8
- Remove eighteen 2.5mm screws using the Phillips #1 screwdriver.
- Flip the Chromebook so the top is on the table and the push out the keyboard from the back.
Remove eighteen 2.5mm screws using the Phillips #1 screwdriver.
Flip the Chromebook so the top is on the table and the push out the keyboard from the back.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Nathan Petrie
Member since: 10/31/2018
277 Reputation
2 Guides authored
Badges:
3
Team
IUPUI, Team S1-G4, Harley Fall 2018
Member of IUPUI, Team S1-G4, Harley Fall 2018
IUPUI-HARLEY-F18S1G4
3 Members
2 Guides authored
