Difficulty

Moderate

Steps

9

Time Required

                          15 minutes

Sections

3

  • Keyboard
  • 4 steps
  • Speakers
  • 3 steps
  • Battery
  • 2 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Chromebook x360 11-ae010nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Flip the device upside down so that the screws are visible.
  • Loosen two captive Phillips #1 screws from the center of the device.
  • Remove three 9.3 mm Phillips #1 screws from the joint side of the device.
  • Remove four 6.1 mm Phillips #1 screws from the opening side of the device.

Flip the device upside down so that the screws are visible.

Loosen two captive Phillips #1 screws from the center of the device.

Remove three 9.3 mm Phillips #1 screws from the joint side of the device.

Remove four 6.1 mm Phillips #1 screws from the opening side of the device.

1024

Step 2

  • Insert an iFixit opening tool between the edge of the keyboard assembly and the base of the device.
  • Push down on the handle of the opening tool to create an opening between the keyboard assembly and the base of the device.
  • Move the opening tool around the device, popping open the clips with force when necessary, until the keyboard assembly is fully lifted from the base of the device.

Insert an iFixit opening tool between the edge of the keyboard assembly and the base of the device.

Push down on the handle of the opening tool to create an opening between the keyboard assembly and the base of the device.

Move the opening tool around the device, popping open the clips with force when necessary, until the keyboard assembly is fully lifted from the base of the device.

Step 3

  • Separate the keyboard assembly and the case.
  • Two cables connect the keyboard to the device, so take caution to not damage these cables.
  • Flip the black plastic tab where the wider cable meets the main board using the tip of a spudger or a fingernail.
  • Remove the cable with curved needle nose pliers or your fingers.

Separate the keyboard assembly and the case.

Two cables connect the keyboard to the device, so take caution to not damage these cables.

Flip the black plastic tab where the wider cable meets the main board using the tip of a spudger or a fingernail.

Remove the cable with curved needle nose pliers or your fingers.

Step 4

  • Flip the white plastic tab where the thinner cable meets the main board using the tip of a spudger or a fingernail.
  • Remove the cable with curved needle nose pliers or your fingers.
  • Separate the keyboard from the laptop.

Flip the white plastic tab where the thinner cable meets the main board using the tip of a spudger or a fingernail.

Separate the keyboard from the laptop.

Step 5

              Speakers
  • Remove the four 5 mm Phillips #1 screws from the left and right speakers.

Remove the four 5 mm Phillips #1 screws from the left and right speakers.

Step 6

  • Remove the cable from the right speaker by removing the tape then detaching the cable.

Remove the cable from the right speaker by removing the tape then detaching the cable.

Step 7

  • Pull the white cable down to detach from the battery.
  • Remove the speakers from the laptop.

Pull the white cable down to detach from the battery.

Remove the speakers from the laptop.

Step 8

              Battery
  • Remove the two 5 mm Phillips #1 screws from each side of the battery.

Remove the two 5 mm Phillips #1 screws from each side of the battery.

Step 9

  • Remove the tape from the cable using a pair of tweezers.
  • Gently remove the cable from the plug.
  • Remove the battery from the laptop.

Remove the tape from the cable using a pair of tweezers.

Gently remove the cable from the plug.

Remove the battery from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Devin Cannistraro

Member since: 10/28/2019

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S1-G9, O'Connell Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G9, O'Connell Fall 2019 



                    UMASSD-O'CONNELL-F19S1G9                     


                                            3 Members                     


                                            5 Guides authored