Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes

Sections

1

  • Display
  • 4 steps

Flags

0

  • BackHP Color LaserJet Pro MFP M277dw

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display
  • Lift up the top of the printer by pulling up on it.

Lift up the top of the printer by pulling up on it.

1024

Step 2

  • Remove one Phillips #2 15mm screw.
  • Use the plastic opening tool to remove the top of the display component.
  • The cable connecting the display to the motherboard should be visible.

Remove one Phillips #2 15mm screw.

Use the plastic opening tool to remove the top of the display component.

The cable connecting the display to the motherboard should be visible.

Step 3

  • Lower the back panel by pulling it down.
  • Remove one Phillips #2 10mm screw.
  • Use the plastic opening tool to remove the left side panel.
  • Flipping the printer onto its side makes it easier to remove the panel and access the motherboard.

Lower the back panel by pulling it down.

Remove one Phillips #2 10mm screw.

Use the plastic opening tool to remove the left side panel.

Flipping the printer onto its side makes it easier to remove the panel and access the motherboard.

Step 4

  • Unplug the display from pink cable from the circuit board.
  • Connecting a new display will require you to feed the cable through the printer.

Unplug the display from pink cable from the circuit board.

Connecting a new display will require you to feed the cable through the printer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 1 other contributor 


                    Christopher Fahey

Member since: 10/08/2018

738 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S4-G2, White Fall 2018                        

                                                  Member of Cal Poly, Team S4-G2, White Fall 2018 



                    CPSU-WHITE-F18S4G2                     


                                            3 Members                     


                                            5 Guides authored

Seizure Salad - Dec 7, 2018

Reply

where do you get a new screen

Bernd Kohnen - Jan 7, 2019

Reply

Would like to know too where to get a new screen

az2181 - Feb 1, 2019

Reply

“Connecting a new display will require you to feed the cable through the printer”

Well, it’s actually not too complicated, you don’t need to take any additional parts to do it. Just take out the display (also need to unscrew two black screws inside, first and then grounding cable) and pull the cable out (do it a bit harder as it’s tight), and then when you change the display, feed the cable through by using different path.

In terms of finding the display, it’s not easy, as hp doesn’t sell it. You are may be lucky to find it on eBay…

mariamaxwell88 - Apr 14, 2019

Reply

looked on ebay could not find maybe you have another place

Mahmoud Mizo - Jan 24, 2020

Reply

where we can get the new display could you advise.