Hp Color Laserjet Pro Mfp M277Dw Power Module Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          20 minutes

Sections

Power Module
5 steps

Flags

BackHP Color LaserJet Pro MFP M277dw
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Power Module

Open and lower the back panel by pulling it down.
Remove one Phillips #2 10 mm screw.

Open and lower the back panel by pulling it down.

Remove one Phillips #2 10 mm screw.

1024

Step 2

Use the plastic opening tool to remove the right side panel of the printer.
Flipping the printer on its side, with the right side facing up, will make it easier to remove.

Use the plastic opening tool to remove the right side panel of the printer.

Flipping the printer on its side, with the right side facing up, will make it easier to remove.

Step 3

Remove two Phillips #2 12mm screws.
Remove four different pin connectors that attach to the power module located at the bottom.
Removing the white connector is made easier with assistance of a spudger/flat tip that loosens the clamp.

Remove two Phillips #2 12mm screws.

Remove four different pin connectors that attach to the power module located at the bottom.

Removing the white connector is made easier with assistance of a spudger/flat tip that loosens the clamp.

Step 4

Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer.

Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer.

Step 5

Slowly lift the power module from the printer using both hands.

Slowly lift the power module from the printer using both hands.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Lyndon Fresnido

Member since: 10/08/2018

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team S4-G2, White Fall 2018                        

                                                  Member of Cal Poly, Team S4-G2, White Fall 2018 



                    CPSU-WHITE-F18S4G2                     


                                            3 Members                     


                                            5 Guides authored

Jakob Hetzendorfer - Feb 12, 2020

Hello, wäre can i buy the power supply? Thank you

patrik maurer - Nov 10, 2022

Thanks a lot - also works for model M281fdw

Introduction#

What you need#

Team#

Introduction

What you need

Team