Difficulty
Easy
Steps
11
Time Required
Suggest a time??
Sections
4
- Open front access panel
- 1 step
- Removing Top Lid
- 4 steps
- Remove Back Panel of Lid
- 3 steps
- Scanner Light
- 3 steps
Flags
1
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackHP Deskjet F4480
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Open front access panel
- Open the front access panel by placing your finger in the front slot and pulling gently.
Open the front access panel by placing your finger in the front slot and pulling gently.
1024
Step 2
Removing Top Lid
- Open the protective lid that is covering the glass. Press gently against the base of the panel to remove the lid from the rest of the printer.
Open the protective lid that is covering the glass. Press gently against the base of the panel to remove the lid from the rest of the printer.
Step 3
- Remove the four 9mm T10 Torx screws on the top.
Remove the four 9mm T10 Torx screws on the top.
Step 4
- Carefully lift the top panel off of the printer.
- Do not tear or damage the two cables that connect the top lid to the motherboard.
Carefully lift the top panel off of the printer.
Do not tear or damage the two cables that connect the top lid to the motherboard.
Step 5
- Remove the two cables by gripping each one close to their connection ports on the motherboard and gently disconnecting them.
Remove the two cables by gripping each one close to their connection ports on the motherboard and gently disconnecting them.
Step 6
Remove Back Panel of Lid
- Remove one 9mm T10 Torx screw from the back of the printer lid.
Remove one 9mm T10 Torx screw from the back of the printer lid.
Step 7
- Press outward on the plastic tab holding the back panel in place.
Press outward on the plastic tab holding the back panel in place.
Step 8
- Pull the back panel towards you and lift it away from the rest of the printer cover.
- Some ribbon cables may still be inserted through the back panel. Be careful not to damage these and they should slide out easily.
Pull the back panel towards you and lift it away from the rest of the printer cover.
Some ribbon cables may still be inserted through the back panel. Be careful not to damage these and they should slide out easily.
Step 9
Scanner Light
- Remove scanner bar from track inside lid.
- Do not try to detach the large ribbon cable. It is not designed to be removed from the scanner bar. Also do not try to pull ribbon cable out of the lid.
Remove scanner bar from track inside lid.
Do not try to detach the large ribbon cable. It is not designed to be removed from the scanner bar. Also do not try to pull ribbon cable out of the lid.
Step 10
- Remove two 9mm T10 Torx screws from the scanner bar to release scanner light.
Remove two 9mm T10 Torx screws from the scanner bar to release scanner light.
Step 11
- Separate the scanner light from the rest of the scanner bar.
Separate the scanner light from the rest of the scanner bar.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Tim
Member since: 01/15/2013
184 Reputation
4 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 18-35, Regan Winter 2013
Member of Cal Poly, Team 18-35, Regan Winter 2013
CPSU-REGAN-W13S18G35
5 Members
8 Guides authored
