Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Hp Deskjet Ink Advantage 1515 Paper feeds halfway fix. Replacement
  • 5 steps

Flags

4

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackHP Deskjet Ink Advantage 1515

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Hp Deskjet Ink Advantage 1515 Paper feeds halfway fix. Replacement
  • Disconnect the printer from power source and then open the photocopy/scanner door.
  • You will see four screws on the ends. Unsrew them with the necessary equipment.
  • Carefully lift the top of the printer. Lift he back first near the paper tray to expose the interior of the printer.

Disconnect the printer from power source and then open the photocopy/scanner door.

You will see four screws on the ends. Unsrew them with the necessary equipment.

Carefully lift the top of the printer. Lift he back first near the paper tray to expose the interior of the printer.

1024

Step 2

  • Slowly remove the cables that are connected to the motherboard and the sensor.
  • Now remove all other cables connected to the motherboard as shown.
  • Unscrew the motherboard by removing three screws.

Slowly remove the cables that are connected to the motherboard and the sensor.

Now remove all other cables connected to the motherboard as shown.

Unscrew the motherboard by removing three screws.

Step 3

              Remove ink catridge to expose all cables.
  • Unscrew the three screws one on the upper side on the left and two that are in the middle of the catridge belt mover.
  • Remove it to expose the cables.

Unscrew the three screws one on the upper side on the left and two that are in the middle of the catridge belt mover.

Remove it to expose the cables.

Step 4

              Check for broken cables.
  • As you can see in this case my printer has broken cables. The yellow, green and black cables are broken.
  • Replaces the cables. It is also important to check the sensor cable.

As you can see in this case my printer has broken cables. The yellow, green and black cables are broken.

Replaces the cables. It is also important to check the sensor cable.

Step 5

              Reassemble your printer.
  • After replacing any broken cables, reassemble your printer starting with the printer mover rail.
  • Screw it tightly into place.
  • Screw the motherboard into place tightly.
  • Ensure everything is in place.
  • Your printer should work just fine.

After replacing any broken cables, reassemble your printer starting with the printer mover rail.

Screw it tightly into place.

Screw the motherboard into place tightly.

Ensure everything is in place.

Your printer should work just fine.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Samuel Githinji

Member since: 09/30/2016

128 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Rao - Dec 15, 2016

Reply

Thank you very much sir I got it .

Samuel Githinji - Jan 19, 2017

You are much welcome. Glad to know I was able to help.