Difficulty

Easy

Steps

11

Time Required

                          10 minutes

Sections

1

  • Battery and m.2.
  • 11 steps

Flags

3

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHP DS0011 DX Battery

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Shut Down Laptop
  • Firstly, shut down the laptop so that the hard drive is not damaged while removing and replacing the m.2. After doing this, set laptop down on its back.

Firstly, shut down the laptop so that the hard drive is not damaged while removing and replacing the m.2. After doing this, set laptop down on its back.

1024

Step 2

              Remove Back Cover Screws
  • Remove the screws on the back cover using a Phillips head screwdriver.

Remove the screws on the back cover using a Phillips head screwdriver.

Step 3

              Remove Back Cover
  • Approach the back cover from the corners and pry it off with a flathead so that the m.2 is exposed.

Approach the back cover from the corners and pry it off with a flathead so that the m.2 is exposed.

Step 4

              Remove screws from m.2.
  • Remove the screws from the m.2 so that it can be removed. Adjust Phillips head accordingly.

Remove the screws from the m.2 so that it can be removed. Adjust Phillips head accordingly.

Step 5

              Unplug m.2.
  • Unplug the m.2 from the laptop and remove it. Remove gently to ensure other parts of the laptop are not damaged.

Unplug the m.2 from the laptop and remove it. Remove gently to ensure other parts of the laptop are not damaged.

Step 6

              Replace With New m.2.
  • Replace the old m.2 with the new one. Plug in the new m.2 to the m.2 port and screw in tightly.

Replace the old m.2 with the new one. Plug in the new m.2 to the m.2 port and screw in tightly.

Step 7

              Unscrew Battery
  • Adjust Phillips head screw-driver and unscrew the screws for the battery.

Adjust Phillips head screw-driver and unscrew the screws for the battery.

Step 8

              Remove Battery
  • Take out the battery by lifting up and pulling from the port.

Take out the battery by lifting up and pulling from the port.

Step 9

              Replace With New Battery
  • Replace the old battery with the new one. Plug battery into port and screw the screws.

Replace the old battery with the new one. Plug battery into port and screw the screws.

Step 10

              Put Back Cover Back On
  • After completely screwing in the battery and m2, put the back cover on by putting it on the magnetic contact and pushing it down into the clips.

After completely screwing in the battery and m2, put the back cover on by putting it on the magnetic contact and pushing it down into the clips.

Step 11

              Screw Back Cover back
  • Screw the back cover back on to the laptop.

Screw the back cover back on to the laptop.

Once completed it may take a little bit for the computer to reboot. If the computer does not restart, contact a speacialist.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Zak Boyadjian

Member since: 11/23/2021

193 Reputation

                                      1 Guide authored                  



                       Badges:
                       1