Hp Elite X2 G1 1012 Display Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes            

Sections

1

• Display
• 6 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackHP Elite x2 G1 1012

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Display               

• Be sure to power off and unplug your device before you begin your repair.
• With the screen face down, lift up the stand as far as it goes.
• Make sure not to force it past the resting point.

Be sure to power off and unplug your device before you begin your repair.

With the screen face down, lift up the stand as far as it goes.

Make sure not to force it past the resting point.

1024

Step 2

• Use a T5 driver to remove the six screws on the back of the tablet.

Use a T5 driver to remove the six screws on the back of the tablet.

Step 3

• After removing the screws, delicately close the stand.
• Flip the tablet on its back so that the screen is facing up.

After removing the screws, delicately close the stand.

Flip the tablet on its back so that the screen is facing up.

Step 4

• Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion.
• Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.

Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion.

Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.

Step 5

• Remove the tape on the lower left side of the screen.
• Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.

Remove the tape on the lower left side of the screen.

Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.

Step 6

• Disconnect the flex cable from the device using the spudger.
• Remove the Display Assembly from the device.

Disconnect the flex cable from the device using the spudger.

Remove the Display Assembly from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Colin Mika                     

Member since: 04/19/2018

913 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team S24-G7, Maness Spring 2018                        

                                                  Member of Cal Poly, Team S24-G7, Maness Spring 2018 



                    CPSU-MANESS-S18S24G7                     


                                            4 Members                     


                                            6 Guides authored