Hp Elitebook 1040 G4 Coin Cell Battery Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          10 - 20 minutes            

Sections

3

• Back Cover
• 2 steps
• Battery
• 3 steps
• Coin Cell Battery
• 4 steps

Flags

0

• BackHP EliteBook 1040 G4

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

To complete this guide, you will need a T5 Torx head screwdriver and a Phillips #1 and #00 screwdriver.

Before beginning, be sure to completely power off and unplug your computer.

What you need

Step 1

              Back Cover               

• Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.

Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.

1024

Step 2

• Lift the back cover up and off the device.

Lift the back cover up and off the device.

Step 3

              Battery               

• Use a Phillips #00 screwdriver to remove the eight 4 mm screws securing the battery to the motherboard.

Use a Phillips #00 screwdriver to remove the eight 4 mm screws securing the battery to the motherboard.

Step 4

• Use a plastic spudger to carefully disconnect the battery pin connector from its port, slowly lifting the pin connector from each side until it releases.

Use a plastic spudger to carefully disconnect the battery pin connector from its port, slowly lifting the pin connector from each side until it releases.

Step 5

• Lift and remove the battery from the device.

Lift and remove the battery from the device.

Step 6

              Coin Cell Battery               

• Carefully disconnect the pin connector from the right side of the speaker assembly.

Carefully disconnect the pin connector from the right side of the speaker assembly.

Step 7

• Use a Phillips #1 screwdriver to remove the two 6 mm black screws securing the speakers to the device.
• Lift the speakers up and out.

Use a Phillips #1 screwdriver to remove the two 6 mm black screws securing the speakers to the device.

Lift the speakers up and out.

Step 8

• Carefully disconnect the coin cell battery cable located under the motherboard.

Carefully disconnect the coin cell battery cable located under the motherboard.

Step 9

• Remove the coin cell battery.

Remove the coin cell battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    SW Reeves                     

Member since: 02/10/2022

265 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       The Citadel Military College of South Carolina, Team 7-10, Eggleston Spring 2022                        

                                                  Member of The Citadel Military College of South Carolina, Team 7-10, Eggleston Spring 2022 



                    CMCSC-EGGLESTON-S22S7G10                     


                                            3 Members                     


                                            3 Guides authored