Hp Elitebook 830 X360 G6 Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Back Cover
4 steps

Flags

BackHP EliteBook 830 x360 G6
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Unfasten the back cover

For your safety, discharge the battery below 25% and power down your device before disassembly.
Use a Torx T5 screwdriver to loosen the five captive screws holding the back cover.

For your safety, discharge the battery below 25% and power down your device before disassembly.

Use a Torx T5 screwdriver to loosen the five captive screws holding the back cover.

1024

Step 2

              Release the clips

Insert an opening pick between a corner of the back corner and the chassis, near a hinge.
Pry upward to release the retaining clips.
These clips will make an audible click when they release.
Repeat this process for the opposite corner.

Insert an opening pick between a corner of the back corner and the chassis, near a hinge.

Pry upward to release the retaining clips.

These clips will make an audible click when they release.

Repeat this process for the opposite corner.

Step 3

              Release the remaining clips

Insert your opening pick between the back cover and chassis, along the edge of the cover between the hinges.
Pry up to release the additional retaining clips.

Insert your opening pick between the back cover and chassis, along the edge of the cover between the hinges.

Pry up to release the additional retaining clips.

Step 4

              Remove the back cover

Grab the cover by the corners next to the hinges.
Swing the cover open and away from you.
If the back cover feels stuck to the chassis, use an opening pick to release remaining clips around the perimeter of the back cover.
Lift and remove the back cover from the laptop body.

Grab the cover by the corners next to the hinges.

Swing the cover open and away from you.

If the back cover feels stuck to the chassis, use an opening pick to release remaining clips around the perimeter of the back cover.

Lift and remove the back cover from the laptop body.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our HP EliteBook community for help.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Clay Eickemeyer

Member since: 09/19/2022

14,946 Reputation

                                      125 Guides authored                  



                       Badges:
                       27







                                                        +24 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team