Hp Elitebook 840 G5 Back Cover Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          4 - 5 minutes

Sections

Back Cover
3 steps

Flags

BackHP EliteBook 840 G5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Use a Phillips #1 screwdriver to undo the five screws. The top three screws are 10 mm and the two side screws are 7 mm.
Unscrew the bottom three screws using the same screwdriver.
The bottom Phillips #1 screws don’t remove from the back plate, but do need to be unscrewed.
Some models have a slightly different screw configuration, shown in the second photo.

Use a Phillips #1 screwdriver to undo the five screws. The top three screws are 10 mm and the two side screws are 7 mm.

Unscrew the bottom three screws using the same screwdriver.

The bottom Phillips #1 screws don’t remove from the back plate, but do need to be unscrewed.

Some models have a slightly different screw configuration, shown in the second photo.

1024

Step 2

Turn computer so that the hinged side is facing up.
Use the plastic opening tool to pry open the back plate.
Drag the plastic opening tool along the edge from left to right and use a second opening tool to pry open the top right corner.
Repeat the 3rd step for the other side.
Repeat on Left and Right sides of the system. There are two points in the middle (on the left and right sides of the center screw) that will release with slight lifting pressure.
You should be able to hear a pop when prying open the corners.

Turn computer so that the hinged side is facing up.

Use the plastic opening tool to pry open the back plate.

Drag the plastic opening tool along the edge from left to right and use a second opening tool to pry open the top right corner.

Repeat the 3rd step for the other side.

Repeat on Left and Right sides of the system. There are two points in the middle (on the left and right sides of the center screw) that will release with slight lifting pressure.

You should be able to hear a pop when prying open the corners.

Step 3

Grab the back plate and separate it slowly away from the device.
No wiring is connected to the back plate. Separate with caution, as there are electric components on the inside.

Grab the back plate and separate it slowly away from the device.

No wiring is connected to the back plate. Separate with caution, as there are electric components on the inside.

To reassemble your device, follow these instructions in reverse order. This step is critical, as it is the beginning of all guides to access the internal of the computer.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 9 other contributors

                    Lucas Martos-Repath

Member since: 04/23/2018

673 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team S25-G13, Maness Spring 2018                        

                                                  Member of Cal Poly, Team S25-G13, Maness Spring 2018 



                    CPSU-MANESS-S18S25G13                     


                                            4 Members                     


                                            14 Guides authored

F H - Dec 2, 2018

vous auriez le numero de piece a commander , je ne le trouve nul part

Fiona Fars - Jun 28, 2019

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team