Difficulty
Moderate
Steps
13
Time Required
20 minutes
Sections
2
- Battery
- 5 steps
- Display Assembly
- 8 steps
Flags
0
BackHP EliteBook 840 G7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
To know if you have a bad screen signs include: Large crack in screen, no response, dim light, large rainbow lines and dots.
What you need
Step 1
Battery
- Turn the laptop on its back.
Turn the laptop on its back.
1024
Step 2
- Use the Phillips # 1 screwdriver to remove the five 1.2 mm screws from the back cover of the laptop.
Use the Phillips # 1 screwdriver to remove the five 1.2 mm screws from the back cover of the laptop.
Step 3
- Remove the back cover to expose the hardware.
Remove the back cover to expose the hardware.
Step 4
- Use your Phillips #1 screwdriver and remove the four 1.2 mm screws that secures the battery into place.
- Remove the connector that connects the battery to the motherboard.
Use your Phillips #1 screwdriver and remove the four 1.2 mm screws that secures the battery into place.
Remove the connector that connects the battery to the motherboard.
Step 5
- Lift up the battery with you hands or tools.
Lift up the battery with you hands or tools.
Step 6
Display Assembly
- Pull up to remove the two coaxial Wi-Fi card connectors.
Pull up to remove the two coaxial Wi-Fi card connectors.
Step 7
- Pull upwards on the display connector to remove.
Pull upwards on the display connector to remove.
Step 8
- Pull or push to remove the bundled cable connector.
Pull or push to remove the bundled cable connector.
Step 9
- Pull upwards to remove the webcam connector.
Pull upwards to remove the webcam connector.
Step 10
- Once you’ve disconnected all cables from their sockets, gently move them to the top of the laptop.
Once you’ve disconnected all cables from their sockets, gently move them to the top of the laptop.
Step 11
- Use your Phillips # 1 screwdriver to remove the four 1.2 mm screws.
Use your Phillips # 1 screwdriver to remove the four 1.2 mm screws.
Step 12
- Use your Phillips # 1 screwdriver to remove the two 1.2mm screws.
Use your Phillips # 1 screwdriver to remove the two 1.2mm screws.
Step 13
- Open the laptop to a 90 degree angle.
- Slide the display hinges away to remove the display assembly.
Open the laptop to a 90 degree angle.
Slide the display hinges away to remove the display assembly.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Pedro Ramos Espinoza
Member since: 02/10/2022
652 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
Gateway, Team 1-1, Pee Spring 2022
Member of Gateway, Team 1-1, Pee Spring 2022
GCC-PEE-S22S1G1
4 Members
5 Guides authored
