Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

  • Battery
  • 3 steps

Flags

0

  • BackHP Elitebook x360 1030 G2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Prepare your device               
  • Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Disconnect the power from the computer by unplugging the power cord from the computer.
  • Disconnect all external devices from the computer.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

1024

Step 2

              Remove the bottom cover               
  • Remove the five Torx-4 T4M2.0×7.4 shoulder screws that secure the bottom cover to the computer.
  • Use a spudger to separate the rear edge of the bottom cover and the keyboard/top cover.
  • Remove the bottom cover by sliding it up and back at an angle.

Remove the five Torx-4 T4M2.0×7.4 shoulder screws that secure the bottom cover to the computer.

Use a spudger to separate the rear edge of the bottom cover and the keyboard/top cover.

Remove the bottom cover by sliding it up and back at an angle.

Step 3

              Remove the battery               
  • Disconnect the battery cable from the system board.
  • Remove the six Phillips PM2.0×5.3 screws that secure the battery to the keyboard/top cover.
  • Remove the battery.

Disconnect the battery cable from the system board.

Remove the six Phillips PM2.0×5.3 screws that secure the battery to the keyboard/top cover.

Remove the battery.

To replace the battery & reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Max Kletskov                     

Member since: 04/22/2020

37,916 Reputation

                                      15 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored