Hp Elitebook X360 1040 G5 Screen Display Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          30 - 45 minutes            

Sections

1

• Screen display
• 5 steps

Flags

0

• BackHP EliteBook x360 1040 G5

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen display               

• Open your laptop.
• Apply heat to the perimeter of screen display using the low setting on the heat gun or hair dryer. Keep the heat gun at least 6 inches away from the device at all time to prevent damage to other components.
• Continue to apply heat for 5 to 10 minutes.

Open your laptop.

Apply heat to the perimeter of screen display using the low setting on the heat gun or hair dryer. Keep the heat gun at least 6 inches away from the device at all time to prevent damage to other components.

Continue to apply heat for 5 to 10 minutes.

1024

Step 2

• Using the jimmy tool pry outward on the screen display, starting near one of the top corners.
• Carefully pry along the perimeter of the display until the screen can be easily removed.
• Lay the screen face down on the keyboard for the next step.

Using the jimmy tool pry outward on the screen display, starting near one of the top corners.

Carefully pry along the perimeter of the display until the screen can be easily removed.

Lay the screen face down on the keyboard for the next step.

Step 3

• Carefully remove the clear adhesive protector from the smallest ribbon cable, located closest to the laptop hinge.
• Gently slide the connector out of the harness, moving it towards the side of the laptop with the power button.

Carefully remove the clear adhesive protector from the smallest ribbon cable, located closest to the laptop hinge.

Gently slide the connector out of the harness, moving it towards the side of the laptop with the power button.

Step 4

• Carefully remove the clear adhesive protector from the last ribbon cable, located on the large black strip on the back of the screen display.
• Gently remove the ribbon cable from the harness by moving it toward the laptop hinge.

Carefully remove the clear adhesive protector from the last ribbon cable, located on the large black strip on the back of the screen display.

Gently remove the ribbon cable from the harness by moving it toward the laptop hinge.

Step 5

• Remove the screen from the laptop.

Remove the screen from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Tyler A Cobb                     

Member since: 09/03/2019

321 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S1-G1, Hovde Fall 2019                        

                                                  Member of IUPUI, Team S1-G1, Hovde Fall 2019 



                    IUPUI-HOVDE-F19S1G1                     


                                            3 Members                     


                                            2 Guides authored