Difficulty
Easy
Steps
3
Time Required
4 minutes
Sections
2
- Lower Case
- 2 steps
- SSD
- 1 step
Flags
0
BackHP EliteBook x360 1040 G5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lower Case
- Power off device before disassembly.
- Use the T5 Torx screwdriver to remove the six 4 mm screws from the underside of the laptop.
Power off device before disassembly.
Use the T5 Torx screwdriver to remove the six 4 mm screws from the underside of the laptop.
1024
Step 2
- Pry open the lower case from where it meets the laptop base.
- Remove the lower case from the work area.
Pry open the lower case from where it meets the laptop base.
Remove the lower case from the work area.
Step 3
SSD
- Use the Phillips 0 screwdriver to remove the 2mm Phillips screws from the SSD assembly.
- Gently slide the SSD to the right and pull out to remove it from its position within the motherboard.
Use the Phillips 0 screwdriver to remove the 2mm Phillips screws from the SSD assembly.
Gently slide the SSD to the right and pull out to remove it from its position within the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Corey Agena
Member since: 04/21/2019
746 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team S1-G4, Maness Spring 2019
Member of Cal Poly, Team S1-G4, Maness Spring 2019
CPSU-MANESS-S19S1G4
4 Members
6 Guides authored
