Difficulty

Moderate

Steps

7

Time Required

                          8 - 10 minutes

Sections

3

  • Lower Case
  • 2 steps
  • Battery
  • 2 steps
  • Touchpad
  • 3 steps

Flags

0

  • BackHP EliteBook x360 1040 G5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lower Case
  • Power off device before disassembly.
  • Use the T5 Torx screwdriver to remove the six 4 mm screws from the underside of the laptop.

Power off device before disassembly.

Use the T5 Torx screwdriver to remove the six 4 mm screws from the underside of the laptop.

1024

Step 2

  • Pry open the lower case from where it meets the laptop base.
  • Remove the lower case from the work area.

Pry open the lower case from where it meets the laptop base.

Remove the lower case from the work area.

Step 3

              Battery
  • Use the Phillips 1 screwdriver to remove the five 3mm Phillips screws from the battery assembly.

Use the Phillips 1 screwdriver to remove the five 3mm Phillips screws from the battery assembly.

Step 4

  • Carefully remove the power supply connector by pulling on both sides of its head.
  • Do not tug on the wires as they may become damaged.
  • Lift the battery from its position, removing it from the device.

Carefully remove the power supply connector by pulling on both sides of its head.

Do not tug on the wires as they may become damaged.

Lift the battery from its position, removing it from the device.

Step 5

              Touchpad
  • Use the Phillips 0 screwdriver to remove the six 3mm Phillips screws from the touchpad assembly.

Use the Phillips 0 screwdriver to remove the six 3mm Phillips screws from the touchpad assembly.

Step 6

  • Gently pull on the blue tab to remove the ribbon connecting the touchpad to the motherboard on the left hand side.
  • Gently pull on the blue tab to remove the ribbon connecting the touchpad to the motherboard on the right hand side.

Gently pull on the blue tab to remove the ribbon connecting the touchpad to the motherboard on the left hand side.

Gently pull on the blue tab to remove the ribbon connecting the touchpad to the motherboard on the right hand side.

Step 7

  • Gently pull up on the top two corners of the touchpad and remove it from the laptop.

Gently pull up on the top two corners of the touchpad and remove it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Corey Agena

Member since: 04/21/2019

746 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team S1-G4, Maness Spring 2019                        

                                                  Member of Cal Poly, Team S1-G4, Maness Spring 2019 



                    CPSU-MANESS-S19S1G4                     


                                            4 Members                     


                                            6 Guides authored