Hp Envy 15 U001Dx Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

• Screen
• 6 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackHP ENVY x360 15-U Series

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Remove the two screw covers located in the bottom corners of the screen and the 2.5 mm Phillips #0 screws underneath them.
• If these screws are not removed and you separate the bottom portion of the screen, you will not be able to refasten the screen to the back because the screw tab will break.

Remove the two screw covers located in the bottom corners of the screen and the 2.5 mm Phillips #0 screws underneath them.

If these screws are not removed and you separate the bottom portion of the screen, you will not be able to refasten the screen to the back because the screw tab will break.

1024

Step 2

• Only after removing the two bottom corner screws in Step 1, separate the screen from the back using an opening tool.

Only after removing the two bottom corner screws in Step 1, separate the screen from the back using an opening tool.

Step 3

• Remove the two 2.5 mm Phillips #0 screws with a Phillips#0 Screwdriver.

Remove the two 2.5 mm Phillips #0 screws with a Phillips#0 Screwdriver.

Step 4

• Detach the webcam from the damaged screen using spudger.
• The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Detach the webcam from the damaged screen using spudger.

The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Step 5

• Gently detach small white connector with spudger.

Gently detach small white connector with spudger.

Step 6

• Gently remove the tape with the wire to completely separate the screen.

Gently remove the tape with the wire to completely separate the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Joshua Madden                     

Member since: 09/25/2016

670 Reputation

                                      1 Guide authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 9-4, Lacy Fall 2016                        

                                                  Member of USF Tampa, Team 9-4, Lacy Fall 2016 



                    USFT-LACY-F16S9G4                     


                                            4 Members                     


                                            7 Guides authored