Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
2
- Back Cover
- 2 steps
- Hard Drive
- 1 step
Flags
0
BackHP Envy 17-3070nr
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Before you begin taking apart the computer, make sure that it is completely powered off.
- Slide the release latch away from the nearest edge.
- Slide the back cover off of the computer.
Before you begin taking apart the computer, make sure that it is completely powered off.
Slide the release latch away from the nearest edge.
Slide the back cover off of the computer.
1024
Step 2
- Remove the six 3.7mm Phillips screws.
- Slide the back cover until it clicks, then lift it straight off.
Remove the six 3.7mm Phillips screws.
Slide the back cover until it clicks, then lift it straight off.
Step 3
Hard Drive
- Remove the four 3.7mm Phillips screws that hold the hard drive onto the computer.
- Remove the hard drive by lifting it out of its cavity.
- Unplug the hard drive cable that connects it to the main assembly.
Remove the four 3.7mm Phillips screws that hold the hard drive onto the computer.
Remove the hard drive by lifting it out of its cavity.
Unplug the hard drive cable that connects it to the main assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Jasper Lewin
Member since: 04/21/2015
748 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 14-8, Amido Spring 2015
Member of Cal Poly, Team 14-8, Amido Spring 2015
CPSU-AMIDO-S15S14G8
4 Members
12 Guides authored