Difficulty
Moderate
Steps
7
Time Required
10 - 15 minutes
Sections
1
- Fan Module
- 7 steps
Flags
2
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHP Envy 17-J013CL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Taking the battery out
- Hold the laptop and push the slider all the way till the battery pops out a little.
Hold the laptop and push the slider all the way till the battery pops out a little.
1024
Step 2
- Unscrew the screw holding the backplate then pry open the backing.
Unscrew the screw holding the backplate then pry open the backing.
Step 3
- Unscrew the screws holding the chassis in place.
Unscrew the screws holding the chassis in place.
Step 4
- Unscrew the Cd-Player and carefully slide the player out to the side.
Unscrew the Cd-Player and carefully slide the player out to the side.
Step 5
- Lift the back plate off the laptop, make sure to remove any wires connected to it.
Lift the back plate off the laptop, make sure to remove any wires connected to it.
Step 6
- Unscrew the fan and unplug the fan from the case.
- Yellow - Unscrew. Red - Keep
Unscrew the fan and unplug the fan from the case.
Yellow - Unscrew. Red - Keep
Step 7
- Lift the fan and That’s It!
Lift the fan and That’s It!
To reassemble your device, follow these instructions in reverse order. (Don’t forget to plug in each wire)
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Dean Heller
Member since: 06/16/2022
145 Reputation
1 Guide authored
Badges:
2