Difficulty

Moderate

Steps

13

Time Required

                          45 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Display
  • 10 steps

Flags

0

  • BackHP Envy 23-d060qd TouchSmart

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Use your hands to unclip the plastic snaps on the back panel of the device.

Use your hands to unclip the plastic snaps on the back panel of the device.

1024

Step 2

  • Remove the three 11.5mm PH2 screws from the back panel.
  • The screws will not fall out of the back panel, but they will unscrew to release the back panel.

Remove the three 11.5mm PH2 screws from the back panel.

The screws will not fall out of the back panel, but they will unscrew to release the back panel.

Step 3

  • Now, take the back panel off by pulling at it gently with your hands.

Now, take the back panel off by pulling at it gently with your hands.

Step 4

              Display
  • Use your hands to unclip the plastic bezels for the DVD drive and ports.
  • To unclip the plastic bezels, push the middle of each plastic bezel towards the center of the computer, and then pull them outwards.
  • You may want to lay the computer face down, on a flat, clean surface to ensure nothing falls out when disassembling the computer for next steps.

Use your hands to unclip the plastic bezels for the DVD drive and ports.

To unclip the plastic bezels, push the middle of each plastic bezel towards the center of the computer, and then pull them outwards.

You may want to lay the computer face down, on a flat, clean surface to ensure nothing falls out when disassembling the computer for next steps.

Step 5

  • Remove the nineteen 10mm T15 black screws from the edge of the computer.
  • Lay the computer on its front when preforming this step, and leave it face down for the rest of the guide.

Remove the nineteen 10mm T15 black screws from the edge of the computer.

Lay the computer on its front when preforming this step, and leave it face down for the rest of the guide.

Step 6

  • Lift up the computer by the base very slowly, and disconnect the three wired connections to the display with your hands. Always disconnect wired connections from the plastic base.

Lift up the computer by the base very slowly, and disconnect the three wired connections to the display with your hands. Always disconnect wired connections from the plastic base.

Step 7

  • Set the computer aside, and use a small knife to cut the strips attaching the display to the digitizer.

Set the computer aside, and use a small knife to cut the strips attaching the display to the digitizer.

Step 8

  • Use a plastic spudger to unclip the 3 ribbon clips on the back of the display.

Use a plastic spudger to unclip the 3 ribbon clips on the back of the display.

Step 9

  • Remove the four 7mm T15 silver screws from the edge of the computer.

Remove the four 7mm T15 silver screws from the edge of the computer.

Step 10

  • Gently pull the display free from the digitizer with your hands.

Gently pull the display free from the digitizer with your hands.

Step 11

  • Remove the four 17.5mm T15 screws from the speakers.
  • When the speakers are free, use your hands to pull them free from the digitizer.

Remove the four 17.5mm T15 screws from the speakers.

When the speakers are free, use your hands to pull them free from the digitizer.

Step 12

  • Remove the three 10mm T15 screws from bezel.

Remove the three 10mm T15 screws from bezel.

Step 13

  • Use your hands to pull the plastic bezel off of the digitizer.

Use your hands to pull the plastic bezel off of the digitizer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 6 other contributors 


                    Zachary Dicks

Member since: 10/01/2015

1,069 Reputation

                                      7 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Cal Poly, Team 5-10, Maness Fall 2015                        

                                                  Member of Cal Poly, Team 5-10, Maness Fall 2015 



                    CPSU-MANESS-F15S5G10                     


                                            4 Members                     


                                            14 Guides authored

illola - Jul 8, 2016

Reply

On step 5 you’ve to remove also the 4 silver screw that keep display to the mainboard chassis.

Aram Vardanyan - Oct 22, 2016

Reply

From where can I buy the glass to replace?

Feras Emad - Dec 7, 2016

Reply

i wont 5 pics please send yor number watsap or send me Offer price for HP ENVY 23-d117a glass

Thanks »

Feras emad

00966543470171

info@fersawy.com

Sunitha.jijo@yahoo.com - Feb 19, 2017

Reply

687535-001 this is the part required

Model No HP envy 23 Delhi 0201 N.

Serial no. CZC 31443 LD kindly let me know whether it is available and please mail the details to sunitha.jijo@yahoo.com

Frank Scullion - Oct 14, 2017

Reply

Hi.

My touchscreen has been cracked too.

Can anyone help to direct me to somewhere to buy a replacement screen please?

frank_scullion@yahoo.co.uk

Thanks in anticipation