Hp Envy 23 D060Qd Touchsmart Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Back Panel
3 steps
Speakers
4 steps

Flags

BackHP Envy 23-d060qd TouchSmart
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Use your hands to unclip the plastic snaps on the back panel of the device.

Use your hands to unclip the plastic snaps on the back panel of the device.

1024

Step 2

Remove the three 11.5mm PH2 screws from the back panel.
The screws will not fall out of the back panel, but they will unscrew to release the back panel.

Remove the three 11.5mm PH2 screws from the back panel.

The screws will not fall out of the back panel, but they will unscrew to release the back panel.

Step 3

Now, take the back panel off by pulling at it gently with your hands.

Now, take the back panel off by pulling at it gently with your hands.

Step 4

              Speakers

Remove the receiver for the keyboard and mouse with your hands.

Remove the receiver for the keyboard and mouse with your hands.

Step 5

Remove the four 17.5mm T15 screws from the speakers.
Remove the five 7.5mm T15 screws from the cover plate.
Remove the cover plate with your hands.

Remove the four 17.5mm T15 screws from the speakers.

Remove the five 7.5mm T15 screws from the cover plate.

Remove the cover plate with your hands.

Step 6

Disconnect the two speaker connections from the motherboard with your hands. Use your hands to gently pull the plastic piece at the ends of the wires.
Be gentle when disconnecting any wired connections. Pulling on the wires can damage them.

Disconnect the two speaker connections from the motherboard with your hands. Use your hands to gently pull the plastic piece at the ends of the wires.

Be gentle when disconnecting any wired connections. Pulling on the wires can damage them.

Step 7

Remove the speakers from the computer, and if needed, separate by disconnecting the wires between them.
Be gentle when separating wired connections. Pulling on the wires can damage them.

Remove the speakers from the computer, and if needed, separate by disconnecting the wires between them.

Be gentle when separating wired connections. Pulling on the wires can damage them.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors

                    Zachary Dicks

Member since: 10/01/2015

1,069 Reputation

                                      7 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Cal Poly, Team 5-10, Maness Fall 2015                        

                                                  Member of Cal Poly, Team 5-10, Maness Fall 2015 



                    CPSU-MANESS-F15S5G10                     


                                            4 Members                     


                                            14 Guides authored

Clovis Young - Apr 17, 2016

where to get the replacement speaker???????

Introduction#

What you need#

Team#

Introduction

What you need

Team