Difficulty
Moderate
Steps
4
Time Required
5 minutes
Sections
2
- Bottom Cover
- 2 steps
- RAM
- 2 steps
Flags
0
BackHP Envy 4-1030us
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
When working with electronic components, we recommend wearing an electrostatic wristband, it is possible for the static electricity present on you to discharge onto one of the components, wearing one of these wristbands and clipping it to a piece of metal will prevent this from happening.
What you need
Step 1
Bottom Cover
- Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.
Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.
1024
Step 2
- Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.
- Lift the bottom cover off of the system.
Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.
Lift the bottom cover off of the system.
Step 3
RAM
- Pull the two metal tabs on the left and right sides away from the chip.
Pull the two metal tabs on the left and right sides away from the chip.
Step 4
- Grab the chip and slowly slide it upward and away from the computer.
Grab the chip and slowly slide it upward and away from the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Christopher Luna
Member since: 10/08/2017
694 Reputation
6 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team S1-G1, Thompson Fall 2017
Member of USF Tampa, Team S1-G1, Thompson Fall 2017
USFT-THOMPSON-F17S1G1
4 Members
6 Guides authored