Difficulty
Difficult
Steps
7
Time Required
25 - 45 minutes
Sections
1
- Printhead
- 7 steps
Flags
0
BackHP Envy 5660
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Printhead
- Open the printer so that the underside of the scanner is showing.
Open the printer so that the underside of the scanner is showing.
1024
Step 2
- Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.
Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.
Step 3
- Remove right side of the printer using a plastic opening tool or metal spudger.
Remove right side of the printer using a plastic opening tool or metal spudger.
Step 4
- Remove spring from the side of the print head rail using a metal spudger.
Remove spring from the side of the print head rail using a metal spudger.
Step 5
- Push the metal rail the print head rests on inwards to remove it from its bearings.
Push the metal rail the print head rests on inwards to remove it from its bearings.
Step 6
- Remove the belt from the back of the print head using a metal spudger.
Remove the belt from the back of the print head using a metal spudger.
Step 7
- Remove the print head from the metal rail by sliding it off the rail.
Remove the print head from the metal rail by sliding it off the rail.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Ryan Steakley
Member since: 01/23/2018
781 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S1-G6, Livingston Winter 2018
Member of Cal Poly, Team S1-G6, Livingston Winter 2018
CPSU-LIVINGSTON-W18S1G6
4 Members
5 Guides authored
