Difficulty

Moderate

Steps

6

Time Required

                          4 - 8 minutes

Sections

3

  • Battery
  • 1 step
  • Hard Drive
  • 3 steps
  • RAM
  • 2 steps

Flags

0

  • BackHP Envy m6-n010dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Find the battery removal slider.
  • Slide it across while simultaneously popping out and removing the device’s battery.

Find the battery removal slider.

Slide it across while simultaneously popping out and removing the device’s battery.

1024

Step 2

              Hard Drive
  • Remove the five marked screws found under the battery using a philips head screwdriver.

Remove the five marked screws found under the battery using a philips head screwdriver.

Step 3

  • Remove the small panel on the back by prying it off. This should reveal the hard drive.

Remove the small panel on the back by prying it off. This should reveal the hard drive.

Step 4

  • The hard drive is connected to the motherboard via this blue-tabbed cable, highlighted in red.
  • Gently pry off the cover to release the cable.
  • Slowly lift the hard drive out and away from the device.

The hard drive is connected to the motherboard via this blue-tabbed cable, highlighted in red.

Gently pry off the cover to release the cable.

Slowly lift the hard drive out and away from the device.

Step 5

              RAM
  • Remove the highlighted screws
  • Pry off the lower two grip pads
  • You may need to use more force than feels necessary
  • Remove the two additional screws underneath the lower grip pads
  • Remove the large back panel to reveal the inner workings
  • The back panel might be difficult to remove. Use a flat object to help pry it off, and don’t be afraid to use force.

Remove the highlighted screws

Pry off the lower two grip pads

You may need to use more force than feels necessary

Remove the two additional screws underneath the lower grip pads

Remove the large back panel to reveal the inner workings

The back panel might be difficult to remove. Use a flat object to help pry it off, and don’t be afraid to use force.

Step 6

  • Pull back the black rectangular cover to reveal the RAM
  • Unclip the metal restraints on the side to pop out the RAM
  • Repeat the previous step for the second RAM below

Pull back the black rectangular cover to reveal the RAM

Unclip the metal restraints on the side to pop out the RAM

Repeat the previous step for the second RAM below

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Johnathan Morales

Member since: 02/08/2018

390 Reputation

                                      3 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       University of North Texas, Team S2-G1, Thomas Spring 2018                        

                                                  Member of University of North Texas, Team S2-G1, Thomas Spring 2018 



                    UNT-THOMAS-S18S2G1                     


                                            4 Members                     


                                            6 Guides authored