Difficulty

Moderate

Steps

5

Time Required

                          6 - 15 minutes

Sections

2

  • Back Panel
  • 3 steps
  • Speaker
  • 2 steps

Flags

0

  • BackHP Envy m6-p114dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

This guide will show you the step by step process of removing the speaker for a HP Envy m6-p114dx to aid in either speaker replacement or removal of the hard drive. The process won’t be too difficult, requiring no special skills. Make sure to be careful when moving and removing fragile parts, because they can be fragile.

What you need

Step 1

              Back Panel
  • Power the device off, unplug it, and ground yourself.

Power the device off, unplug it, and ground yourself.

1024

Step 2

  • Remove the twelve screws in the back case using a Phillips #1 screwdriver.

Remove the twelve screws in the back case using a Phillips #1 screwdriver.

Step 3

  • Carefully wedge an iFixit opening tool under the cover and slide it alongside the case to ensure that all clips are un-clipped.

Carefully wedge an iFixit opening tool under the cover and slide it alongside the case to ensure that all clips are un-clipped.

Step 4

              Speaker
  • Unscrew the two screws that have a pink spacer below them with a Phillips #0 screwdriver.
  • Lift directly up to remove the main speaker.
  • Gently pull the wire out of the plastic track that it’s set in.

Unscrew the two screws that have a pink spacer below them with a Phillips #0 screwdriver.

Lift directly up to remove the main speaker.

Gently pull the wire out of the plastic track that it’s set in.

Step 5

  • Follow the cable around the inside of the case and remove the cable to the main board
  • Once this is removed you can fully remove the speaker!

Follow the cable around the inside of the case and remove the cable to the main board

Once this is removed you can fully remove the speaker!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Shad Padilla

Member since: 08/26/2019

100 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Gateway, Team S1-G1, Saknee Fall 2019                        

                                                  Member of Gateway, Team S1-G1, Saknee Fall 2019 



                    GCC-SAKNEE-F19S1G1                     


                                            2 Members                     


                                            5 Guides authored