Hp Envy Ultrabook 4 1043Cl Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          15 minutes            

Sections

2

• Battery
• 5 steps
• Hard Drive
• 3 steps

Flags

0

• BackHP Envy Ultrabook 4-1043cl

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Flip the laptop over so the bottom is facing you.

Flip the laptop over so the bottom is facing you.

1024

Step 2

• Remove twelve 7.5 mm screws by using the Phillips #00 screwdriver.

Remove twelve 7.5 mm screws by using the Phillips #00 screwdriver.

Step 3

• Use plastic opening tool to remove the back cover.
• You might want to remove it slowly and gently because the back cover is very thin and fragile.

Use plastic opening tool to remove the back cover.

You might want to remove it slowly and gently because the back cover is very thin and fragile.

Step 4

• Remove three 4.2mm screws by using the Phillips #00 screwdriver.

Remove three 4.2mm screws by using the Phillips #00 screwdriver.

Step 5

• Disconnect the battery cable from the motherboard and remove the battery from the device.

Disconnect the battery cable from the motherboard and remove the battery from the device.

Step 6

              Hard Drive               

• The hard drive is in the bottom right corner of the device which is packed by a silver metal shell.
• Use a Phillips #00 screwdriver to remove the four 4.0 mm screws securing the hard drive to the top cover.

The hard drive is in the bottom right corner of the device which is packed by a silver metal shell.

Use a Phillips #00 screwdriver to remove the four 4.0 mm screws securing the hard drive to the top cover.

Step 7

• Use a Phillips #00 screwdriver to remove the four 4.0 mm screws securing the hard drive to the top cover.

Step 8

• Pull the hard disk drive out of the connector socket and remove it from the device.

Pull the hard disk drive out of the connector socket and remove it from the device.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Shen Zhao                     

Member since: 10/01/2019

376 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Duke University Pratt School of Engineering, Team S5-G1, Matos-Garner Fall 2019                        

                                                  Member of Duke University Pratt School of Engineering, Team S5-G1, Matos-Garner Fall 2019 



                    DUKEPSE-MATOS-GARNER-F19S5G1                     


                                            5 Members                     


                                            4 Guides authored