Hp Envy X2 15 C001Dx Battery Replacement Repair Guide

Difficulty

Easy

Steps

13

Time Required

                          10 minutes            

Sections

2

• Back Panel
• 10 steps
• Battery
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Envy X2-15-C001Dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Place the laptop face down on a table.

Place the laptop face down on a table.

1024

Step 2

• Lift up the back stand.

Lift up the back stand.

Step 3

• Remove the five screws from the bottom of the back plate using a Phillips #1 screwdriver.

Remove the five screws from the bottom of the back plate using a Phillips #1 screwdriver.

Step 4

• Remove four screws from the back stand hinges using a Phillips #1 screwdriver.

Remove four screws from the back stand hinges using a Phillips #1 screwdriver.

Step 5

• Remove the hinges and the back stand from the laptop.

Remove the hinges and the back stand from the laptop.

Step 6

• Use a spudger to remove the thin panel where the back stand was.

Use a spudger to remove the thin panel where the back stand was.

Step 7

• Remove the screws from the back panel using a Phillips #1 screwdriver.

Remove the screws from the back panel using a Phillips #1 screwdriver.

Step 8

• Remove two side screws using a Phillips #1 screwdriver.

Remove two side screws using a Phillips #1 screwdriver.

Step 9

• Pry apart the base from the screen by going around the entire perimeter with an opening tool.

Pry apart the base from the screen by going around the entire perimeter with an opening tool.

Step 10

• Remove the back panel from the laptop.

Remove the back panel from the laptop.

Step 11

              Battery               

• Unplug the battery connector from the motherboard.

Unplug the battery connector from the motherboard.

Step 12

• Remove the eight screws holding the battery in place using a Phillips #1 screwdriver.

Remove the eight screws holding the battery in place using a Phillips #1 screwdriver.

Step 13

• Remove the battery by simply lifting it out of the device.

Remove the battery by simply lifting it out of the device.

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.Take your e-waste to an R2 or e-Stewards certified recycler.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Cole Escobar                     

Member since: 10/25/2021

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team 2-6, Sinclaire Fall 2021                        

                                                  Member of UMass Dartmouth, Team 2-6, Sinclaire Fall 2021 



                    UMASSD-SINCLAIRE-F21S2G6                     


                                            3 Members                     


                                            6 Guides authored