Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes

Sections

1

  • Battery
  • 6 steps

Flags

0

  • BackHP Envy x360 15-bp143cl

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Many factors can cause a laptop’s battery to quickly lose charge. Review the HP Envy x360 15-bp143cl Battery Troubleshooting Page to check if any factors, such as running too many processes at once, are affecting the battery life of your device.

The amount of charge a battery can hold will decrease with extended use. Numerous charging cycles will cause the battery to die. If this is the case, or the device contains a damaged battery, it will need to be replaced.

Turn the laptop off and disconnect it from any power supply before starting the replacement process.

Wear the Anti-Static Wrist Strap before working near the motherboard to prevent any damage.

Warning: If the battery is swollen, excessively hot, or has a poor smell, wait to replace the battery until it is safe. This reduces the possibility of it catching on fire or releasing toxic fumes. If this problem persists, seek professional help.

What you need

Step 1

              Battery
  • Flip the laptop over.
  • Peel off the rubber strip closest to the hinges.

Flip the laptop over.

Peel off the rubber strip closest to the hinges.

1024

Step 2

  • Use a Phillips #1 screwdriver (PH1 bit) to remove the four 6.5mm screws that were underneath the rubber strip.

Use a Phillips #1 screwdriver (PH1 bit) to remove the four 6.5mm screws that were underneath the rubber strip.

Step 3

  • Use a Torx T5 screwdriver (T5 bit) to remove the three 5mm screws near the bottom edge of the laptop.

Use a Torx T5 screwdriver (T5 bit) to remove the three 5mm screws near the bottom edge of the laptop.

Step 4

  • Lift the back panel to remove it from the laptop.
  • Use an opening tool to pry open the back panel if it does not easily lift apart.

Lift the back panel to remove it from the laptop.

Use an opening tool to pry open the back panel if it does not easily lift apart.

Step 5

  • Use a Phillips #1 screwdriver (PH1) to remove the seven 4mm screws indicated by the gray arrows on the battery.

Use a Phillips #1 screwdriver (PH1) to remove the seven 4mm screws indicated by the gray arrows on the battery.

Step 6

  • Pull the battery from the connecting port and lift to remove it from the laptop.

Pull the battery from the connecting port and lift to remove it from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors 


                    Riley Muehler

Member since: 10/10/2019

284 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S12-G3, Regan Fall 2019                        

                                                  Member of Cal Poly, Team S12-G3, Regan Fall 2019 



                    CPSU-REGAN-F19S12G3                     


                                            3 Members                     


                                            6 Guides authored