Difficulty

Easy

Steps

3

Time Required

                          5 - 8 minutes

Sections

1

  • Screen
  • 3 steps

Flags

0

  • BackHP Envy x360 15-bp143cl

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Many factors can cause a laptop’s screen to malfunction or break. Review the HP Envy x360 15-bp143cl Screen Troubleshooting Page to check if any common factors are affecting the performance of your device.

Turn the laptop off and disconnect it from any power supply before starting the replacement process.

What you need

Step 1

              Screen
  • Use a suction handle to pull the screen display out of the screen casing.
  • If the screen is difficult to remove, use an opening tool to pry the sides of screen from the screen casing.

Use a suction handle to pull the screen display out of the screen casing.

If the screen is difficult to remove, use an opening tool to pry the sides of screen from the screen casing.

1024

Step 2

  • Lift the screen display from the screen casing, hinging it from the top edge to expose the back of the panel.
  • Do not separate the display from the casing completely, as there are still cable connections holding it in place.

Lift the screen display from the screen casing, hinging it from the top edge to expose the back of the panel.

Do not separate the display from the casing completely, as there are still cable connections holding it in place.

Step 3

  • Detach the connecting cable between the laptop and the display screen.
  • Remove the display screen.

Detach the connecting cable between the laptop and the display screen.

Remove the display screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Spencer Berkins

Member since: 10/10/2019

556 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team S12-G3, Regan Fall 2019                        

                                                  Member of Cal Poly, Team S12-G3, Regan Fall 2019 



                    CPSU-REGAN-F19S12G3                     


                                            3 Members                     


                                            6 Guides authored

Adrian Munro - Feb 22, 2022

Reply

Thank you for this great guide, been very useful knowing how to remove the screen from th housing! However; I’m looking to replace not the screen but the ‘screen housing’ as the plastic bracket that the hinges screw into (three round flat screws you can see for each hinge) has torn. Very bad design IMHO. The entire screw/bolt has just torn free (all three) on the right hinge. Seeing as the plastic bracket is glued to the metal casing it is irreparable…

Anybody know where I can get the replacement (my HP Envy has a metal/aluminium housing in silver colour).

Kind regards,

Adrian