Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

2

  • Battery
  • 5 steps
  • Hard Drive
  • 2 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Envy x360 15m-bq021dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo using a Phillips #0 screwdriver.
  • Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.

On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo using a Phillips #0 screwdriver.

Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.

1024

Step 2

  • To remove the back cover, use the black spudger to lift up on the edges of the cover.
  • Use a suction cup to assist in lifting the back cover

To remove the back cover, use the black spudger to lift up on the edges of the cover.

Use a suction cup to assist in lifting the back cover

Step 3

  • Use the Philips #0 screwdriver to remove six (6) M2.0x3.2 screws from battery.

Use the Philips #0 screwdriver to remove six (6) M2.0x3.2 screws from battery.

Step 4

  • Using the Philips #0 screwdriver, remove the final screw from the battery connected to the SSD storage unit.

Using the Philips #0 screwdriver, remove the final screw from the battery connected to the SSD storage unit.

Step 5

  • Lift and pull the front of the battery up and out (away from the connector) to remove.

Lift and pull the front of the battery up and out (away from the connector) to remove.

Step 6

              Hard Drive
  • Use the tweezers to lift up the retaining flap on the cable connector.
  • Pull out the ribbon cable from the connector.

Use the tweezers to lift up the retaining flap on the cable connector.

Pull out the ribbon cable from the connector.

Step 7

  • Use the spudger to lift the hard drive from the cutout.

Use the spudger to lift the hard drive from the cutout.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Richard Donald Battel

Member since: 09/21/2021

306 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       The Citadel Military College of South Carolina, Team 3-23, Eggleston Fall 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team 3-23, Eggleston Fall 2021 



                    CMCSC-EGGLESTON-F21S3G23                     


                                            3 Members                     


                                            3 Guides authored

Adam Francis - Jan 11, 2023

Reply

Followed guide to remove HDD from 15m-bq121dx model. Steps were identical. Took more force than I expected to remove bottom cover and to get the HDD out.