Hp Envy X360 M6 Aq005Dx Ram Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          9 - 15 minutes            

Sections

1

• RAM
• 5 steps

Flags

0

• BackHP Envy x360 m6-aq005dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Following the steps and instructions shown below, will help the user in the removal and replacement of the memory (RAM chip).

This guide is for anyone wishing to upgrade or replace a faulty RAM.

What you need

Step 1

              RAM               

• Turn off the computer and disconnect from power and all external devices.
• Close the computer and flip it upside down with the back towards you.
• Use the Phillips #0 screw driver head to remove the two 7.8mm screws that secure the bottom cover to the computer.
• Use the Phillips #00 screw driver head to remove the six 5.2mm screws that secure the bottom cover to the computer.

Turn off the computer and disconnect from power and all external devices.

Close the computer and flip it upside down with the back towards you.

Use the Phillips #0 screw driver head to remove the two 7.8mm screws that secure the bottom cover to the computer.

Use the Phillips #00 screw driver head to remove the six 5.2mm screws that secure the bottom cover to the computer.

1024

Step 2

• Insert the iFixit plastic opening tool between the bottom cover and bottom chassis.
• Lift the cover carefully off the machine.

Insert the iFixit plastic opening tool between the bottom cover and bottom chassis.

Lift the cover carefully off the machine.

Step 3

• Remove the memory module shield that covers the memory module slots.

Remove the memory module shield that covers the memory module slots.

Step 4

• Using tweezers, spread the retaining tabs on each side of the RAM slot to release the RAM.

Using tweezers, spread the retaining tabs on each side of the RAM slot to release the RAM.

Step 5

• Remove the RAM by pulling it away from the slot at an angle

Remove the RAM by pulling it away from the slot at an angle

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Robin Matloob                     

Member since: 11/16/2019

148 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S4-G4, Wilson Fall 2019                        

                                                  Member of IUPUI, Team S4-G4, Wilson Fall 2019 



                    IUPUI-WILSON-F19S4G4                     


                                            4 Members                     


                                            2 Guides authored