Hp Envy X360 M6 W103Dx Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 minutes            

Sections

1

• Keyboard
• 4 steps

Flags

0

• BackHP Envy x360 m6-w103dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Wear the anti-static wrist strap and attach it to a metal surface to avoid damaging sensitive electrical components. Make sure the computer is unplugged and powered off before touching any internal parts.

Removing the keyboard is not dangerous and doesn’t require any special technical skills.

What you need

Step 1

              Keyboard               

• Before you begin, be sure to power off your laptop.
• Using an opening pick, remove the 4 rubber feet and 4 screw covers.

Before you begin, be sure to power off your laptop.

Using an opening pick, remove the 4 rubber feet and 4 screw covers.

1024

Step 2

• Unscrew the twelve 6 mm screws from the bottom of the laptop using a Phillips #0 screwdriver.

Unscrew the twelve 6 mm screws from the bottom of the laptop using a Phillips #0 screwdriver.

Step 3

• Open the laptop carefully, with the keyboard face up.
• Pry around the outside of the keyboard with the plastic opening tool until the keyboard can be lifted slightly.
• When lifting the keyboard do not pull too hard. There are cables that must be disconnected before the keyboard can be removed.

Open the laptop carefully, with the keyboard face up.

Pry around the outside of the keyboard with the plastic opening tool until the keyboard can be lifted slightly.

When lifting the keyboard do not pull too hard. There are cables that must be disconnected before the keyboard can be removed.

Step 4

• Lift the keyboard until you can see the cables connected to the motherboard.
• Gently lift the tab on each ZIF connector that connects each cable to the motherboard using a spudger. Once each tab is flipped up, the corresponding ribbon cable will come out easily.
• Detach the keyboard.

Lift the keyboard until you can see the cables connected to the motherboard.

Gently lift the tab on each ZIF connector that connects each cable to the motherboard using a spudger. Once each tab is flipped up, the corresponding ribbon cable will come out easily.

Detach the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 

                    Steven Ngo                     

Member since: 10/10/2019

835 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team S12-G2, Regan Fall 2019                        

                                                  Member of Cal Poly, Team S12-G2, Regan Fall 2019 



                    CPSU-REGAN-F19S12G2                     


                                            4 Members                     


                                            23 Guides authored