Difficulty
Moderate
Steps
11
Time Required
15 minutes
Sections
2
- Battery
- 2 steps
- Main Board
- 9 steps
Flags
0
BackHP iPAQ H2200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Press and slide the battery cover tab to remove battery cover.
Press and slide the battery cover tab to remove battery cover.
1024
Step 2
- Pull on the black tab to lift the battery out of the battery compartment.
Pull on the black tab to lift the battery out of the battery compartment.
Step 3
Main Board
- Remove the stylus by sliding it out of the slot.
Remove the stylus by sliding it out of the slot.
Step 4
- Remove the CF card by sliding it out of the slot at the top of the device.
Remove the CF card by sliding it out of the slot at the top of the device.
Step 5
- Press down and push the black side strips toward the top of the device to remove them.
Press down and push the black side strips toward the top of the device to remove them.
Step 6
- Using the T5 Torx screwdriver, remove all six screws on the back and all screws on each side of the device.
Using the T5 Torx screwdriver, remove all six screws on the back and all screws on each side of the device.
Step 7
- Remove the back faceplate by pushing and loosening the 4 side slots (2 on each side).
Remove the back faceplate by pushing and loosening the 4 side slots (2 on each side).
Step 8
- Open the LCD connector, where the orange strip attaches to the main board.
Open the LCD connector, where the orange strip attaches to the main board.
Step 9
- Carefully remove the orange LCD strip from the connector.
Carefully remove the orange LCD strip from the connector.
Step 10
- Unscrew the 2 screws located at each top corner of the main board.
Unscrew the 2 screws located at each top corner of the main board.
Step 11
- Remove the main board by pushing outward on the two tabs located on each side near the bottom of the device.
Remove the main board by pushing outward on the two tabs located on each side near the bottom of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 8 other contributors
Tyler Andrews
Member since: 01/13/2010
209 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 4-12, Forte Winter 2010
Member of Cal Poly, Team 4-12, Forte Winter 2010
CPSU-FORTE-W10S4G12
3 Members
5 Guides authored
