Difficulty
Easy
Steps
7
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- Back Case
- 4 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP iPAQ h4155
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- While sliding the silver release tab up, simultaneously lift the cover up from the left side.
While sliding the silver release tab up, simultaneously lift the cover up from the left side.
1024
Step 2
- Push the tab left to right to remove the cover.
Push the tab left to right to remove the cover.
Step 3
- Now, lift the battery up and away from the device to remove it.
Now, lift the battery up and away from the device to remove it.
Step 4
Back Case
- Remove the four silver screws using the T5 Torx Screwdriver (T5 x .25 in).
Remove the four silver screws using the T5 Torx Screwdriver (T5 x .25 in).
Step 5
- Remove the single black screw that is located beneath the HP sticker with the T5 Torx Screwdriver.
Remove the single black screw that is located beneath the HP sticker with the T5 Torx Screwdriver.
Step 6
- Next, use your plastic removal tool to separate the gray back from the black center piece.
- For better results, start the separation at the corner piece.
Next, use your plastic removal tool to separate the gray back from the black center piece.
For better results, start the separation at the corner piece.
Step 7
- Remove the back case.
Remove the back case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 10 other contributors
John Pagliero
Member since: 01/27/2011
942 Reputation
7 Guides authored
Badges:
14
+11 more badges