Hp Laserjet 1160 Or 1320 Control Panel Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          20 minutes            

Sections

5

• Left Side Cover
• 1 step
• Right Side Cover
• 1 step
• Back Cover
• 1 step
• Top Cover
• 2 steps
• Control Panel
• 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHP LaserJet 1160/1320

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Left Side Cover               

• Pull on the two tabs on the back of the printer to release the left side cover.
• Remove the cover by rotating it towards the front of the printer.

Pull on the two tabs on the back of the printer to release the left side cover.

Remove the cover by rotating it towards the front of the printer.

1024

Step 2

              Right Side Cover               

• With the printer turned so that the right side is facing upwards, use a metal spudger to disengage 3 tabs holding the right side cover in place.
• Lift the cover off of the printer.

With the printer turned so that the right side is facing upwards, use a metal spudger to disengage 3 tabs holding the right side cover in place.

Lift the cover off of the printer.

Step 3

              Back Cover               

• Remove 4 screws on the back of the printer.
• Remove the back cover.

Remove 4 screws on the back of the printer.

Remove the back cover.

Step 4

              Top Cover               

• Remove 2 screws on the back of the printer, one on the left, and one on the front.
• The second image shows the formatter removed, but it is not necessary to remove the formatter to replace the top cover.

Remove 2 screws on the back of the printer, one on the left, and one on the front.

The second image shows the formatter removed, but it is not necessary to remove the formatter to replace the top cover.

Step 5

              Top Cover               

• Disconnect the control panel cable and remove the top cover.

Disconnect the control panel cable and remove the top cover.

Step 6

              Control Panel               

• Use a metal spudger to remove the control panel and its circuit board from the top cover.

Use a metal spudger to remove the control panel and its circuit board from the top cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    jdp23                     

Member since: 08/22/2013

1,275 Reputation

                                      23 Guides authored                  



                       Badges:
                       24







                                                        +21 more badges